Xerox 4.1, 4.2 manual Swop Plus details, GCR Workflows

Page 25

SWOP Plus details

This new profile sets hues within the SWOP gamut to continue to simulate a SWOP press. But out-of-gamutSWOP hues are no longer flattened. The out-of-gamut hues above about 70% are saturated.

This profile provides a SWOP press rendering, but it also allows customers to leverage the larger color gamut available on the digital presses. It is expected that this profile will become widely used.

DocuSP now offers three CMYK paths for color objects in the SWOP color space:

♦The SWOP+ path provides contrast similar to SWOP in the midtones but with full gamut boundary mapping of saturated colors. It more closely resembles SWOP prints with more saturated colors in high C,M,Y calls. SWOP+ should be considered for use with legacy SWOP files when SWOP tone reproduction is required but the full (and larger) gamut of the press is desired.

♦The SWOP path (default) offers mapping essentially identical to the TR001 data and SWOP v.2 profile in Photoshop. All existing, published standards offer visually identical output from DocuSP. This choice provides higher RIP speeds but essentially identical output for workflows where the Photoshop SWOP v.2 is common.

♦The Native CMYK path (iGen3 selections) provides a higher contrast, color saturated rendition of a SWOP press. This path should be considered for jobs requiring vibrant color output with legacy SWOP files. This path also provides rated RIP speed as a benefit due to TRC rendering rather than LUT rendering.

GCR Workflows

DocuSP 4.2 provides the user with more Gray Component Removal (GCR) selections, as well as more consistent reproduction across GCR selections.

DocuSP 3.8 and 4.0 to 4.1 Differences Document

21

Page 24 Page 26
Image 25
Page 24 Page 26
Contents DocuSP 4.1 to 4.2 Differences Xerox Corporation Table of Contents Page DocuSP 4.2 Overview Ppml UpdateBackup/Restore Operability Updates DocuSP 3.8 and 4.0 to 4.1 Differences Document Detail shot of new Cut and Stack control in the Layout FAB Imposition/Layout enhancementsAdditional Controls for N-Up layout Imposition Job faults removed and Default scale is 100% Additions to Job Manager Display Job Processing tab shown with job redisplay interval control Completed Job Properties showing Errors… button Error Page enhancementsWorkflow examples Vipp Project Container VPC Filter inclusionVPC Filter GUI with Print and Forget selected VPC Filter GUI with Deploy and Print selected VPC Filter GUI with Deploy Only selected Two-Stage Resource-Based Scheduling Limits, Constraints, and ConsiderationsAdditional PCL Paper Sources PCL PCL XL DocuSP 4.1 to 4.2 Differences Document Pantone Processing controls in Queue Manager Pantone Workflow updatesSWOP+ Introduction GCR Strategy RGB Workflow RGB Relative Colorimetric IntentRGB Perceptual Rendering Intent RGB Saturation and Pure Rendering Intents=G=B=0 to K only GCR Workflows Swop Plus detailsEdge Enhancement control in Halftone FAB Edge EnhancementDocuSP 4.1 to 4.2 Differences Document Bates Print Caveats GUI behaviors Lcds Accounting page updateNew Lcds console Dialog with Current tab selected Lcds Console EnhancementsNew Lcds Console dialog, with the History tab selected DocuSP 3.8 and 4.0 to 4.1 Differences Document Update For DocuPrint 180 only DocuSP 3.8 and 4.0 to 4.1 Differences Document
Top Page Image Contents