Rimage 480i manual Placing a disc on the printer tray

Page 11

Operate the Rimage 480i Printer

Placing a disc on the printer tray

To avoid scratching or damaging the recording surface of the disc, it is important to properly place the disc on the printer tray. Use this procedure to properly place the disc on the printer tray.

Note: If you select Print from your software application, the printer tray opens automatically.

1. To open the printer tray, press . The printer tray opens.

2.Carefully place the disc on the printer tray, aligning the hole in the disc with the small pins on the printer tray.

3.To close the printer tray, press . The printer tray closes. You are ready to use the appropriate software application to print your disc label!

110761_C

7

Image 11

Contents Rimage 480i PrinterTM User Guide European Headquarters Support information Contents Ink requirements IntroductionOperating System requirements Media requirementsLabel design requirements Rimage 480i Printer specificationsFront view Identify the parts of the Rimage 480i PrinterSide view Printer control panel Operate the Rimage 480i Printer Powering up the printerAccessing the Power and USB Cables Opening the Printer Service DoorInk cartridge latch Placing a disc on the printer tray Changing the fan filter Navigating to Printing Preferences Setting the print qualityAdding, editing, or deleting a watermark Setting up color options Adjusting the ink volume usedAligning the ink cartridges Changing or enabling maskingOperate the Rimage 480i Printer Center the image Centering the image on the discChecking the ink levels Cleaning the ink cartridge nozzlesLearn More Safety informationCompliance testing