Rimage 480i manual Changing the fan filter

Page 12

Rimage 480i Printer

Changing the fan filter

The fan filter is a consumable item, so you will need to change it after 20 printer cartridges. Use this procedure to change the fan filter.

1.With a small screwdriver, gently pull on the fan grating. The protective grating and fan filter should come off of the fan housing easily.

2.Gently pull the fan filter housing away from the back of the Rimage 480i.

3.Remove the white filter material.

4.Replace the filter with part number 304219-001.

5.Gently press the fan filter housing into place on the back of the Rimage 480i until it snaps into place.

8

110761_C

Image 12

Contents Rimage 480i PrinterTM User Guide European Headquarters Support information Contents Introduction Operating System requirementsMedia requirements Ink requirementsRimage 480i Printer specifications Label design requirementsIdentify the parts of the Rimage 480i Printer Side viewFront view Printer control panel Powering up the printer Accessing the Power and USB CablesOpening the Printer Service Door Operate the Rimage 480i PrinterInk cartridge latch Placing a disc on the printer tray Changing the fan filter Setting the print quality Navigating to Printing PreferencesAdding, editing, or deleting a watermark Adjusting the ink volume used Setting up color optionsChanging or enabling masking Aligning the ink cartridgesOperate the Rimage 480i Printer Centering the image on the disc Center the imageCleaning the ink cartridge nozzles Checking the ink levelsSafety information Compliance testingLearn More