Operate the Rimage 480i Printer
Operate the Rimage 480i Printer
This chapter provides the information that you need to use and maintain your Rimage 480i Printer.
Powering up the printer
The printer can be in either the ON state (Power LED on) or the sleeping state (Power LED off). Press the Power button to bring the printer out of the sleep state and into the ON state.
Accessing the Power and USB Cables
To access the power and USB cables, you must remove the Cable Access Door as shown.
Opening the Printer Service Door
To open the Printer Service Door, press the tab and lift the door as shown.
Changing ink cartridges
Use this procedure to change the ink cartridges on your Rimage 480i Printer.
Important You must use the appropriate ink cartridges in one of the configurations as stated on page 1 in this document.
1.Lift the Ink Cartridge Access Door. The ink cartridge carriage moves to an accessible position on the carriage guide.
Note: You must wait until the cartridges are resting and uncapped before proceeding.
110761_C | 5 |