Setting Up the Printer
12.Close the upper cover by pressing on the center of the cover until it clicks in place.
Connecting the Cables
If you plan to install the printer driver software on your computer, you will need to install the software before you connect the cables. See Chapter 2 , Installing the Printer Driver Software.
IMPORTANT: You must install the printer driver software before connecting the cables or your printer will not work.
Connecting the Power Cable
You may have received more than one power cable with your printer. Be sure to use the correct power cable required for your country.
1.Check that the power switch is turned off (
).
CAUTION:
The power outlet must be grounded. An ungrounded outlet can cause fire, electric shock, or harmful interference to nearby electrical devices.
2.Connect the power cable to the power connector on the back of the printer and to a grounded power outlet.
OFF | A |