Setting Up the Printer
Loading the Ribbon
For the KODAK Photo Printer 6800, have a KODAK Photo Print Kit 6800/4R or KODAK Photo Print Kit 6800/6R available. These kits contain the correct size ribbon for your printer. See Appendix A for details on the Photo Print Kits (sold separately).
For the KODAK Photo Printer 6805, have a KODAK Photo Print Kit 6805/3R available. This kit contains the correct size ribbon for your printer. See Appendix A for details on the Photo Print Kits (sold separately).
To load the ribbon into the printer:
1.Slide the cover release toward you, then open the upper cover carefully.
IMPORTANT: Cover does not open beyond a 90° angle.
CAUTION:
The thermal head becomes extremely hot during normal operation. Do not touch it.
2.If you are replacing a ribbon, remove the used ribbon from the printer.
| NOTE: Images remain on the ribbon after printing. If you need to maintain |
90˚ | confidentiality, dispose of the used ribbon appropriately. |
3.Insert your fingers into the holes in the plastic on the end of the ribbon. Remove the plastic cover from the ribbon.
IMPORTANT: Do not remove the wrapper from the ribbon at this time.
Wrapper