System connections (continued)
Make sure to unplug the AC power cord before making any connections.
| Installing the AM loop antenna | ||
Right | AM loop | < Assembling > | < Attaching |
speaker | antenna |
| to the wall > |
|
|
| |
|
| Wall |
|
|
| screws (not supplied) | |
|
| Video cable (not supplied) | |
|
|
| To video input jack |
FM antenna |
|
| Left |
|
| speaker | |
AC outlet |
|
|
|
(AC 120 V ~ 60 Hz) |
|
|
|
|
|
| Red |
|
|
| Black |
Volume control |
|
| Line input connection (TV, etc.) |
The sound level at a given volume setting depends on speaker efficiency, location and various other factors. It is advisable to avoid exposure to high volume levels, which occurs while turning the unit on with the volume control setting up high, or while continually listening at high volumes. Excessive sound pressure from earphones and headphones can cause hearing loss.
Speaker connection
For |
|
Connect the black wire to the minus |
|
and the red wire to the plus (+) terminal. |
|
For |
|
Connect the wire without insulation tube to the |
|
minus | Incorrect |
tube to the plus (+) terminal. | |
Use speakers with an impedance of 4 ohms or |
|
more, as lower impedance speakers can damage the unit.
Do not mistake the right and the left channels. The right speaker is the one on the right side when you face the unit.
Do not let the bare speaker wires touch each other.
Do not allow any objects to fall into or to be placed in the bass reflex ducts.
Do not stand or sit on the speakers.You may be injured.
Subwoofer pre-out connection
Connect to the TV using an audio cable.
TV
Main unit
To audio output jack
Audio cable (commercially available)
Audio signal
To LINE input
jack
You can connect a subwoofer with an amplifier to the SUBWOOFER PRE
OUT jack.
Commercially available subwoofer
Audio cable
(amplifier built in)
(commercially Audio signal available) 
To audio input jack
| To SUBWOOFER |
Main unit | PRE OUT jack |
Notes:
No sound is heard from the subwoofer without a
To select Line In function:
On main unit: Press FUNCTION button repeatedly until Line In is displayed.
On remote control: Press AUDIO/LINE (INPUT) button repeatedly until Line In is displayed.
3/7/2012 10:35:20 AM