Sharp XLHF201P Advanced USB playback, Listening to USB mass storage device/ MP3 player

Page 11

Listening to USB mass storage device/ MP3 player (continued)

To play back USB/MP3 player with folder mode off

1Press the USB button on the remote control or FUNCTION button repeatedly on main unit to select USB function. Connect the USB memory device that has MP3/WMA format files on the unit. When the USB memory is connected to the main unit, the device information will be displayed.

2Select desired file to be played back by pressing the or button.

3Press the (CD/USB ) button. Playback will start and the file name will be displayed.

External HDD-storage cannot be played back via USB terminal.

If the data inside the USB memory is large, it may take longer time for the data to be read.

This product can play WMA and MP3 files. It will automatically detect the file type being played. If unplayable file is played on this product, “Not Support” is indicated and the file will be automatically skipped. This will take a few seconds. If abnormal indications appear on the display due to the unspecified file, turn off the unit and then turn it on again.

This product relates to USB mass storage devices and MP3 players. It may however face some irregularities due to various unforeseen reasons from some devices. Should this happen, turn off the unit and then turn it on again.

During CD function, MP3 player will not be charging.

Title, Artist and Album name are displayed if they are recorded in the USB memory device.

Display content can be changed by pressing the CD/USB DISPLAY button.

Note:

To pause playback:

Press the (CD/USB ) button.

To play back USB/MP3 player with folder mode on

1Press the USB button on the remote control or FUNCTION button repeatedly on main unit to select USB function. Connect the USB memory device that has MP3/WMA format files on the unit. When the USB memory is connected to the main unit, the device information will be displayed.

2Press the FOLDER button, and press the PRESET ( or ) button to select desired playback folder. To start playback with folder mode on, go to step 4. To change the playback folder, press the PRESET ( or ) button to select another folder.

3Select desired file to be played back by pressing the or button.

4Press the (CD/USB ) button. Playback will start and the file name will be displayed.

Title, Artist and Album name are displayed if they are recorded in the USB memory device.

Display content can be changed by pressing the CD/USB DISPLAY button.

To remove USB memory device

1Press the (CD/USB ) button to stop playback.

2Disconnect USB memory device from the USB terminal.

Notes:

SHARP will not be held liable for the loss of data while the USB memory device is connected to the audio system.

Files compressed in MP3 and/or WMA format can be played back when connected to the USB terminal.

This USB memory’s format supports FAT 16 or FAT 32.

SHARP cannot guarantee that all USB memory devices will work on this audio system.

USB cable is not recommended for use in this audio system to connect to USB memory device. Use of the USB cable will affect the performance of this audio system. iPod, iPhone and iPad is not prone to this condition.

This USB memory cannot be operated via USB hub.

The USB terminal in this unit is not intended for a PC connection but is used for music streaming with a USB memory device.

Advanced USB playback

 

The following functions are the same as CD operations:

 

 

Page

Direct track search

8

Repeat play

8

Random play

8

Programed play

8-9

Note:

If USB memory device is not connected, “USB No Media” will be shown on the display.

Notes:

This unit only supports “MPEG-1 Audio Layer-3” format. (Sampling Frequency is 32, 44.1, 48kHz)

Playback order for MP3 files may differ depending on the writing software used during file download.

Bitrate which is supported by MP3 is 32~320 kbps, WMA is 64~160 kbps.

For MP3/WMA files, please put “.MP3” “.WMA” extension. Files cannot be played back if there is no MP3/WMA extension.

Playlists are not supported on this unit.

This unit can display Folder Name or File Name up to 32 characters. Maximum total number of MP3/WMA files is 65025.

Total number of folders read is 999 including folder with non-playable file. However, the display shows only folder with MP3/WMA files.

The display playback time may not be displayed correctly when playing back a variable bitrate file.

The ID3TAG information supported are TITLE, ARTIST and ALBUM only. Title name, artist name and album name can be displayed by pressing the DISPLAY button during file playback or pause mode.

WMA meta tag also supports title, artist and album name which are recorded in WMA files. Copyright protected WMA files cannot be played back.

E-10

XL-HF201P_HF301P_US.indd 10

3/7/2012 10:35:25 AM

Image 11
Contents Special Note AccessoriesSpecial Notes Explanation of Graphical SymbolsAdditional Safety Information Important Safety Instructions10 cm PrecautionsFor U.S. customer only System connectionsSubwoofer pre-out connection Volume controlSystem connections Speaker connectionListening to the iPod, iPhone or iPad Remote controlGeneral control IPod and iPhone connection Dock only IPod, iPhone or iPad playbackTo insert adaptor for iPod or iPhone IPhone playbackListening to a CD or MP3/WMA disc Listening to a CD or MP3/WMA disc Programed play MP3/WMA Procedure to playback MP3/WMA disc with folder mode onTo cancel the programed play mode Listening to USB mass storage device/MP3 playerListening to USB mass storage device/ MP3 player To play back USB/MP3 player with folder mode offTo play back USB/MP3 player with folder mode on Advanced USB playbackListening to the radio Setting the clock Remote control onlyTimer playback Timer and sleep operation Remote control onlySetting the clock Remote control only Enhancing your system Timer and sleep operation Remote control onlyTo use timer and sleep operation together HeadphonesTroubleshooting chart Specifications MaintenanceTroubleshooting chart