IPod, iPhone or iPad playback, IPhone playback

Listening to the iPod, iPhone or iPad (continued)

The message “This accessory is not made to work with iPhone” or similar, may appear on the iPhone screen when:

-battery is low.

-the iPhone is not properly docked (eg. slanting).

If this occurs, remove and re-dock the iPhone.

This product is made for iPod, iPhone and iPad. To prevent random interference when iPod, iPhone and iPad is connected, the headphone output is disabled, and “HP INVALID” will be displayed. You may also experience brief audio interference during incoming calls.

iPod, iPhone and iPad connection (USB only)

1	Insert the connector to the	iPad
	iPod, iPhone or iPad.	iPad
	iPod, iPhone or iPad.
		Connector
2	Place the iPad to the stand	iPad
	for iPad.
		Stand for iPad
3	Connect the iPod, iPhone	USB
	or iPad to the unit via USB
	connector.

Note:

USB terminal does not support VIDEO out.

iPod, iPhone or iPad playback

1Press the ON/STAND-BY button to turn the power on.

2Press the USB button on the remote control or FUNCTION button repeatedly on the main unit to select USB function.

3Connect iPod, iPhone or iPad to the unit. “USB/iPod” will appear.

Track number

4Press the (CD/USB ) button to start playback.

Note:

Stop button () is invalid during iPod, iPhone or iPad playback.

Adaptor for iPod and iPhone connection

Notes:

Please use the adaptor supplied with your iPod or iPhone unit.

You can use an audio cable to connect your iPod to the AUDIO IN jack if:

1.your iPod adaptor does not ﬁt into the iPod dock on the main unit.

2.you have an iPod that does not have an iPod adaptor.

3.you have an iPod that does not have an iPod 30 pin connector.

Adaptor No.	iPhone Description	Capacity

12	iPhone	4GB & 8GB & 16GB
15	iPhone 3G	8GB & 16GB
15	iPhone 3GS	16GB & 32GB
19	iPhone 4	16GB & 32GB

To insert adaptor for iPod or iPhone

1Open the docking station for iPod and

iPhone by pulling up.

2Insert the adaptor for iPod or iPhone into unit and connect your iPod or iPhone.

iPhone (bottom)	iPhone

Dock connector

Adaptor for iPhone

Dock for iPhone

Connector for iPhone

Caution:

Unplug all accessories from the iPod or iPhone before inserting it into the dock.

iPhone playback

Sound will only switch from iPhone to the main unit after authentication process is completed in approximately 10 seconds. Incoming calls will pause the playback.

Once the calls are answered, the conversation can only be heard through the built-in iPhone speaker. Turn on the iPhone speaker or undock the iPhone to start conversation.