Listening to a CD or MP3/WMA disc

Listening to the iPod, iPhone or iPad

(continued)

To disconnect iPod, iPhone or iPad

Simply remove the iPod or iPhone from the docking station or iPad connector from USB terminal. It is safe to do so even during playback.

Watching videos on a TV connected to iPod or iPhone

1Press the DISPLAY (TV OUT) button for more than 2 seconds until “TV OUT ON” appear on display.

2Press the ENTER button to start playback.

Notes:

If the TV Out setting is already turned on at video menu, the video is automatically displayed on the TV screen when ENTER key is pressed.

TV out display is not support through USB terminal. (iPad)

To return to watching video on iPod or iPhone screen, press the MENU button to enter video menu. Then press the DISPLAY (TV OUT) button for more than 2 seconds until “TV OUT OFF” appears. During iPod or iPhone video playback, pressing the DISPLAY (TV OUT) button will not toggle video out display between iPod and TV.

Caution:

Unplug all accessories for the iPod or iPhone before inserting it into the docking station.

Stop button () at main unit is invalid during iPod function.

Navigating the iPod, iPhone or iPad menus

1Press the MENU button to view the menu on iPod, iPhone or iPad unit. Press it again to go back to previous menu.

2Use the PRESET ( or ) button to select an item on the menu and then press ENTER button.

Note:

When navigating the iPod, iPhone or iPad menu with remote control, do not operate any of the buttons on the iPod or iPhone unit. The volume level is adjusted by pressing the VOL (+ or -) button on the main unit or the remote control. Adjusting the volume on the iPod, iPhone or iPad units give no effect.

iPod, iPhone and iPad operations:

The operations described below depend on the generation iPod, iPhone and iPad you are using.

System on operation:

When the main unit is powered on, the iPod, iPhone or iPad units will automatically power on when docked or connected in the unit.

System off (stand-by operation):

When the main unit is turned to stand-by mode, the docked iPod, iPhone or connected iPad unit will automatically turn to stand-by mode.

Various iPod, iPhone and iPad functions

Main unit	Remote control
Function		Operation
Dock/USB	Dock	USB
Play	iPod	CD/USB Press in the pause mode.
Pause	iPod	CD/USB Press in the playback
		mode.

Function	Main unit	Remote control		Operation
Function	Dock/USB	Dock	USB	Operation
	Dock/USB	Dock	USB
Track up/				Press in the playback
down				or pause mode. If you
				press the button in the
				pause mode, press the
				button to start the
Fast				desired track.
Fast				Press and hold down in
forward/				the playback mode.
reverse				Release the button to
				resume playback.
Display/	____	iPod	CD/USB	Press for more than
Toggle				2 seconds to toggle
information				the video out display
display				between iPod or TV.
Repeat	____			Press to toggle repeat
				mode.
Shufﬂe	____			Press to toggle shufﬂe
				mode.
Menu	____	iPod	iPod	Press to view the iPod
				menu during iPod
				function.
Enter	____			Press to conﬁrm the
				selection.
Cursor	____			Press to select the iPod
Up/Down				menu.

Disc playback

1Press the ON/STAND-BY button to turn the power on.

2Press the CD button on the remote control or FUNCTION button repeatedly on the main unit to select CD function.

3Press the OPEN/CLOSE button to open the disc tray.

4Place the disc on the disc tray, label side up.

5Press the OPEN/CLOSE button to close the disc tray.

6Press the (CD/USB ) button to start playback. After the last track is played, the unit will stop automatically.

Notes for CD or MP3/WMA disc:

When the end of the last track is reached during fast forward, “END” will appear on the display and CD operation will be paused. When the beginning of the ﬁrst track is reached during fast reverse, the unit will enter the playback mode (only for CD).

Rewritable multi-session discs with unﬁnished writing, can still be played.

E-7

XL-HF201P_HF301P_US.indd 7

3/7/2012 10:35:23 AM