FujiFilm 3500 instruction manual For Network Printing

Page 15

3. INSTALLATION

8.Click the [OK] button. The following appears:

9.Confirm that "FUJIFILM PICTROGRAPHY3500" appears in the [Printers:] field and click the [Next] button.

The following is displayed when the file is copied:

10.Select [PICTRO SCSI: FUJIFILM PICTRO SCSI Port] in [Available ports:] and click the [Next] button.

The following appears:

11.Specify a printer name in the field currently displaying the name of the default printer. You may select any printer in place of the default printer.

If another printer is already installed, you will be prompted as follows: "Use this printer as the default printer?" Select [Yes] or

[No].

After completing printer selection, click the [Finish] button.

12.If installation of the printer driver is complete, the icon for the new printer appears in the [Printers] folder window.

13.Restart the computer.

3.2.3For Network Printing

For network printing, install printer drivers in both the server and client computers by the respective procedures described below.

3.2.3.1Installing to the server

1.To install the printer driver, follow steps 1. through 12. in "3.2.2 For Local Printing".

2.Select [Setting] > [Printer] from the [Start] menu. The [Printers] folder window appears.

3.Click the [FUJIFILM PICTROGRAPHY3500] icon and click [Sharing...] on the [File] menu.

13

Image 15

Contents Pictrography Licensing Agreement Introduction Contents Error Messages Restrictions Windows Printer DriverHardware SoftwareSetting up AppleTalk to enable network printing Precautions for Using the Printer DriverSetting up the Pictrography Installing the Aspi ManagerConnecting the Pictrography 3500 for the first time InstallationFor Local Printing InstallationAfter completing printer selection, click the Finish button Install From Disk screen appearsFor Network Printing Click the Have Disk buttonInstalling to client computers You can also interactively select the printer by clicking Uninstall For Local Printing For Network Printing Installing to client computers \\SERVER\PG3500 Windows NT Click the Close button. The following appears Installation Printer field Windows Click the New Port Type This completes the installation of Pictro Scsi PortNow install the printer Click the OK button. The following appears Select Share as Installing to client computers Windows XP For Local Printing Pictro Scsi Fujifilm Pictro Scsi Port from the list of ports Click the OK button. The following appears For Network Printing Click the Add a printer icon Select Share nameName for the printer Select a network printer, or a printer attached to anotherComputer, and then click the Next button Specify a Printer dialog box is displayedMacintosh Mac OS 9 or earlier Check in Share this item and its contents Click PictroGraphy 3500 in the Chooser window System Preferences window appears Click the Continue Installation buttonClick Network Select Quit Print Center from the Print Center menu System Preferences window appears Click SharingSharing dialog box appears Select Show Info from the Printers menu Click to select the installed PictrographyMark the Printer Sharing check box with a √ and close Sharing windowClose the Printer List window Select PICTROGRAPHY3500 for Printer Name Using the Printer DriverPrint setup and printing Work flow through printingVersion information button Help buttonAnce Temperature Kelvin degrees K .Message Monitor SpoolerPrinter folder Spool Settings... button Setting buttonNo changes need to be made here under normal circumstances Click this button to delete a port Configure Port... buttonClick this button to add a new port Delete Port buttonScheduling WindowsPaper Setting Print setup 6 ICM When printing from Illustrator, check the boxReddish When not checked9300 Color temperatures of 9300K and γ Gray2 6500 Color temperatures of 6500K and γ Gray3 sRGBPrint Monitor Different printing methodsYou can specify Source Profile on screen after you click ColorSyncApplication Name Print file User nameTures of 9300K * 1 and γ 2.2 Print Center Mined by settings for Gray balanceUsing the Printer Driver Error Messages Print server is set to foreground printing Connection to server not set. Set an appropriate serverConnection to server not found. Make sure if it is sharable Necessary file not foundRestrictions for Network Printing About setup for number of copiesPrecautions for using ICM RestrictionsRestrictions Others Fujifilm Abroad

Related manuals

Manual 52 pages 2.88 Kb