4. USING THE PRINTER DRIVER
•Paper Size
Select a paper size for printing.
Note that the printable paper size depends on the type of paper currently loaded in the PICTROGRAPHY 3500.
•Orientation
Select an orientation of printing.
2.Setting print conditions
Open the print data file and then select [Print] from the [File] menu.
The [Print] window appears.
•Printer
Select a destination to print (printer name).
•Copies
Specify the number of copies you plan to print. The maximum number of copies is 50.
3.Setting image processing options
Click the
[Image Processing]. The following appears.
•Brightness
Adjust the print density. Settings toward the right (plus direc- tion) result in lighter prints, while settings toward the left (mi- nus direction) result in darker prints.
•Contrast
Adjust the print contrast. Settings toward the right (plus direc- tion) produce higher contrast, while settings toward the left (minus direction) produce lower contrast.
•Color balance (Red/Green/Blue)
Adjust color balance for prints. Settings toward the right (plus direction) result in higher print density of the color specified, while settings toward the left (minus direction) result in lower print density of the color specified.
•Image process
Select a
ON1 (CG): | Performs color conversions suitable for print- |
| ing |
| graphics. |
| Intended for monitors having color tempera- |
| tures of 9300K *1 and γ 2.2*2. |
ON2 (Photo): | Produces somewhat softer prints. |
| Intended for monitors having color tempera- |
| tures of 6500K and γ 1.8. |
ON3 (sRGB): | Suitable for printing with an sRGB*3 moni- |
| tor. |
| As compared with ON1 setting, ON3 setting |
| enables to print saturated colors lower in |
| brightness and higher in saturation. |
ON4: | A |
(PG3000 OFF) | produces results close to that obtained with |
| PICTROGRAPHY 3000 color matching |
| function set to "OFF". |
53