FujiFilm 3500 instruction manual For Network Printing

Page 32

3. INSTALLATION

19.Select [Do not share this printer], and then click the [Next] button.

The following appears.

22.If you chose to print the test page in step 20, the following screen is displayed.

If the test page prints without problems, click the [Yes] button. Otherwise, click the [Troubleshoot] button and perform trouble- shooting as instructed on-screen.

20.Choose to print or not print a test page following the completion of printer driver installation. Make your selection and click the [Next] button.

The following appears.

23.If the installation of the printer driver finishes without problems, the icon for the new printer appears in the [Printers and Faxes] folder window, as shown below.

21.Click the [Finish] button.

In certain cases, this will display the [Hardware Installation] dialog box, prompting you as the figure below. If this message appears, click [Yes] to continue with the installation.

The file is copied.

24.Restart the computer.

This completes the installation of the printer driver.

3.5.2For Network Printing

For network printing, install printer drivers on both server and client computers by the following procedures:

•Precautions on the running of Windows NT 4.0 on the server computer and Windows XP on the client computer.

When the printer driver is installed under the following condi- tions, the Windows NT 4.0 printer driver may end up being in- stalled on a machine running Windows XP. To avoid this, take care to follow the installation procedures given below when in- stalling printer drivers under these conditions.

[Conditions]

*The server computer is running Windows NT4.0.

*The client computers are running Windows XP. The Windows XP PG3500 printer driver is not yet installed on the client com- puters.

30

Image 32

Contents Pictrography Licensing Agreement Introduction Contents Error Messages Restrictions Printer Driver HardwareSoftware WindowsPrecautions for Using the Printer Driver Setting up the PictrographyInstalling the Aspi Manager Setting up AppleTalk to enable network printingInstallation Connecting the Pictrography 3500 for the first timeInstallation For Local PrintingInstall From Disk screen appears For Network PrintingClick the Have Disk button After completing printer selection, click the Finish buttonInstalling to client computers You can also interactively select the printer by clicking Uninstall For Local Printing For Network Printing Installing to client computers \\SERVER\PG3500 Windows NT Click the Close button. The following appears Installation Printer field Windows This completes the installation of Pictro Scsi Port Click the New Port TypeNow install the printer Click the OK button. The following appears Select Share as Installing to client computers Windows XP For Local Printing Pictro Scsi Fujifilm Pictro Scsi Port from the list of ports Click the OK button. The following appears For Network Printing Select Share name Click the Add a printer iconSelect a network printer, or a printer attached to another Computer, and then click the Next buttonSpecify a Printer dialog box is displayed Name for the printerMacintosh Mac OS 9 or earlier Check in Share this item and its contents Click PictroGraphy 3500 in the Chooser window Click the Continue Installation button System Preferences window appearsClick Network Sharing dialog box appears Select Quit Print Center from the Print Center menuSystem Preferences window appears Click Sharing Click to select the installed Pictrography Mark the Printer Sharing check box with a √ and closeSharing window Select Show Info from the Printers menuClose the Printer List window Using the Printer Driver Print setup and printingWork flow through printing Select PICTROGRAPHY3500 for Printer NameHelp button Version information buttonTemperature Kelvin degrees K . Message MonitorSpooler AncePrinter folder No changes need to be made here under normal circumstances Spool Settings... buttonSetting button Configure Port... button Click this button to add a new portDelete Port button Click this button to delete a portWindows SchedulingPaper Setting Print setup When printing from Illustrator, check the box 6 ICMWhen not checked 9300 Color temperatures of 9300K and γ Gray26500 Color temperatures of 6500K and γ Gray3 sRGB ReddishDifferent printing methods Print MonitorColorSync ApplicationName Print file User name You can specify Source Profile on screen after you clickTures of 9300K * 1 and γ 2.2 Mined by settings for Gray balance Print CenterUsing the Printer Driver Error Messages Connection to server not set. Set an appropriate server Connection to server not found. Make sure if it is sharableNecessary file not found Print server is set to foreground printingAbout setup for number of copies Precautions for using ICMRestrictions Restrictions for Network PrintingRestrictions Others Fujifilm Abroad

Related manuals

Manual 52 pages 2.88 Kb