4. USING THE PRINTER DRIVER
for UC type
•Paper size
Select a paper size for printing.
Note that the printable paper size depends on the type of paper currently loaded in the PICTROGRAPHY 3500.
•Direction of paper
Choose Portrait or Landscape.
•[Help] button
Click this button to display Help for the printer driver.
•[Version information] button
Click this button to display the Version Information screen for the printer driver.
3.Image processing setting options
Click the [Image processing setting] tag on the [FUJIFILM PICTROGRAPHY3500 Properties] dialog box to display the following:
•ICM
Check this box if you plan to use the Windows color manage- ment function (ICM).
*ICM is supported only by Windows 98 (Windows 98 with Service Pack 1 and Windows 98 Second Edition), Windows 2000 and Windows XP.
•Matching method
Choose a color matching method (Rendering Intent) with ICM. The following choices are available:
Perseptual: | Performs |
| nied by compression of the color reproduc- |
| tion spectrum. |
| The most suitable color reproduction is ob- |
| tained when sRGB monitor is chosen as the |
| input profile. |
Relative Colorimetric:
Compensates for white color differences, as opposed to absolute reproduction.
Saturation: | The same as "Perseptual". |
Absolute Colorimetric:
Performs colorimetric matching. Colors out- side the color reproduction spectrum are poorly reproduction.
*ICM is supported only by Windows 98 (Windows 98 with Service Pack 1 and Windows 98 Second Edition), Windows 2000 and Windows XP.
•Profile
Choose an ICC profile. Here, select [Pictrography3500 PG- D_ER].
*This
•Brightness
Adjust the print density. Settings toward the right (plus direc- tion) result in lighter prints, while settings toward the left (mi- nus direction) result in darker prints.
•Contrast
Adjust the print contrast. Settings toward the right (plus direc- tion) produce higher contrast, while settings toward the left (minus direction) produce lower contrast.
•Color balance (Red/Green/Blue)
Adjust color balance for prints. Settings toward the right (plus direction) result in higher print density of the color specified, while settings toward the left (minus direction) result in lower print density of the color specified.
•Image process
Select a
ON1 (CG): | Performs color conversions suitable for print- |
| ing |
| graphics. |
| Intended for monitors having color tempera- |
| tures of 9300K*1 and γ 2.2*2. |
42