Arcam AVR600 manual PVR Device Mode, VCR Device Mode

Page 31

���PVR Device Mode

The V Device Mode button configures the CR102 to control the functions of a video recorder or similar device. You will need to configure this Device Mode to work with your equipment. Pressing this button also selects PVR as the AVR600 source.

PToggles power between standby and on.

0…9

Functions as original remote number key.

PHONO

Selects Tape input on AVR600.

SHIFT + Eselects PHONO input on the

E

 

AVR600.

TV/AV

Toggles between available inputs (e.g. AV1,

RAV2)

SModifies many keys (see individual key descriptions, below)

 

Selects multichannel (MCH) input on

AUX

AVR600.

HSHIFT + Hselects AUX input on the AVR600.

NET

Selects iPOD input on AVR600.

SHIFT + E selects network (Net) internal

E

input on the AVR600.

 

Navigate setup and programme selection

��

menus.

OK is equivalent to ‘Enter’ or ‘Select’ on

 

 

some remotes.

MOperates the Exit function if the PVR uses this feature

UTurns on the Menu function if the PVR uses this feature

DToggles display between TV and PVR

@Toggles the mute function. By default this key operates the AMP Mute

]

Channel down

[

Channel up

-+ volumeDecrease (–) and increase (+) AVR600

)

Fast rewind

$

Play

&Toggles pause of playback

( Fast forward

!Operates the Favourites function if the PVR uses this feature.

#Stop playback

%Starts recording

H(not used)

UDuplicates function of Red key (if used)

(RED)

TDuplicates function of Green key (if used)

(Green)

ODuplicates function of Yellow key (if used)

(Yellow)

BDuplicates function of Blue key (if used).

(Blue)

���VCR Device Mode

The W Device Mode button configures the CR102 to control the functions of a video recorder or similar device. You will need to configure this Device Mode to work with your equipment. Pressing this button also selects VCR as the AVR600 source.

PToggles power between standby and on.

0…9

Functions as original remote number key.

PHONO

Selects Tape input on AVR600.

SHIFT + Eselects PHONO input on the

E

 

AVR600.

TV/AV

Toggles between available inputs (e.g. AV1,

RAV2)

SModifies many keys (see individual key descriptions, below)

 

Selects multichannel (MCH) input on

AUX

AVR600.

HSHIFT + Hselects AUX input on the AVR600.

NET

Selects iPOD input on AVR600.

SHIFT + E selects network (Net) internal

E

input on the AVR600.

 

Navigate setup and programme selection

��

menus.

OK is equivalent to ‘Enter’ or ‘Select’ on

 

 

some remotes.

MOperates the Exit function if the VCR uses this feature

UTurns on the Menu function if the VCR uses this feature

DToggles display between TV and VCR

@Toggles the mute function, if available.

By default this key operates the AMP Mute

]

Channel down

[

Channel up

-+ volumeDecrease (–) and increase (+) amplifier

)

Fast rewind

$

Play

English

&Toggles pause of playback

( Fast forward

!Ejects tape

#Stop playback

%Starts recording

H(not used)

UDuplicates function of Red key (if used)

(RED)

TDuplicates function of Green key (if used)

(Green)

ODuplicates function of Yellow key (if used)

(Yellow)

BDuplicates function of Blue key (if used).

(Blue)

E-29

Page 30 Page 32
Image 31
Page 30 Page 32
Contents N d b o o k AVR surround amplifier AVR600Class II product Safety GuidelinesImportant safety instructions Safety complianceInstructions de sécurité importantes Class II produitRespect des consignes de sécurité Page Welcome ContentsProfessional Installation? DIY setup?Before you Begin… Interconnect cables PowerStandby power Placing the unitTrademark acknowledgements Power inlet Video connectorsDigital connectors Audio connectorsComponent/RGB Video Composite Hdmi connectorsGeneral Making connectionsConnect the Component video outputs of your source Zone 3 connectorsZone 2 connectors Digital audio connectorsFront panel Phones socket Phono Analogue audio Front panel AUX inputMCH input Inputs Analogue record outputsEnglish Use the Composite connection if Hdmi DVD playerSatellite receiver CD playerConnecting an iPod using the Arcam rDock Aerial connectors Radio ConnectorsSirius Connecting an aerial RLead/rDock Other ConnectorsData connectors Network connectors USB connector RS232 serial connectorInfra-red IR connectors English Trigger connectorsRoom Connecting subwoofers Speaker cables Connecting speakersSpeakers Surround left and right CentreSubwoofer Front left and rightSelecting a source Switching onOperation Operating your AVR600Extended front panel menu Using Zone 2Updating firmware using a PC Restore to factory defaultsFront panel Operation Inserting batteries into the remote control CR102 universal remote controllerUsing the remote control Useful information Device Mode / Source keysCode blink-back Controlling other devicesIPod commands AMP Device ModeOK selects/play the highlighted file Highlighted menu on the screen TUN Device ModeDVD Device Mode Network commandsAV Device Mode SAT Device ModeMenus VCR Device Mode PVR Device ModeCD Device Mode English Speaker Levels Essential SetupSpeaker types Speaker DistancesVery strong acoustic resonances within the room Auto speaker SetupProblems Using a subwooferNavigating the setup menu Setup menusTreble Bass Input ConfigPlii Dimension Plii Centre Width Plii Panorama General SetupGeneral information and system controls Spkr Levels Auto SetupSpkr Types Spkr DistanceFor analogue outputs Video InputsVideo Outputs Important points to rememberFor Stereo sources Zone SettingsMode NetworkIntroduction Decoding ModesTwo-channel source modes For Dolby Digital sources High resolution audio sourcesMulti-channel source modes Decoding modesCalibration Offset SettingsVolume Leveller Dolby Volume is a sophisticated newEnglish Tuner Operation Tuning/Channel SelectionSaving and selecting Presets Deleting PresetsLocking Channels Sirius errorsDefault unlock code is OperationInternet radio stations Network/usb OperationSelecting the playback source USB playbackSW2, SW3 External AmplifiersAudio outputs Multi-room Set upZone Zone 2 and 3 control outputsZone English Code Learning Customising CR102Creating Macros Volume punch-throughKey Mover Copy a key between Device Modes Mode MoverLocking/Unlocking a specific Device Mode To restore a moved Device Mode key to its original stateResetting the CR102 Mode key IR punch-throughProblem Check that Wired network Volume is always too loudWhen I turn on Switched offContinual improvement policy SpecificationsProblems? Product GuaranteeWorldwide Guarantee Claims under guaranteeDevice code Tables ITC HCMICE IRTSEI RFTSBR SEGKLH AVPGPX KECDKK ADBNTL UPCENG CATCGV DCEUEC AsciSKY+ TPSYES SH215E Issue 4301-7333+0
Related manuals
Manual 74 pages 35.94 Kb Manual 74 pages 48.95 Kb Manual 68 pages 17.1 Kb

AVR600 specifications

The Arcam AVR600 is a high-performance AV receiver that is designed for audiophiles and home cinema enthusiasts who seek a premium audio and video experience. This receiver stands out with its array of features and technologies that elevate sound quality and user experience.

At the heart of the AVR600 is its high-fidelity amplification system. The receiver is equipped with a robust 7-channel amplification setup, delivering a total output of 120 watts per channel into 8 ohms. This power enables the AVR600 to reproduce dynamic audio with precision, whether it be for movies, music, or gaming. The class G amplifier design offers exceptional efficiency and reduces distortion, ensuring that sound remains clean and focused even at higher volumes.

The AVR600 boasts extensive connectivity options to accommodate various audio and video sources. It features multiple HDMI inputs and outputs supporting 3D video and 4K scaling, providing flexibility for connecting modern devices. The unit also includes analog and digital inputs, a dedicated phono input for vinyl enthusiasts, and support for multi-room audio setups. With its built-in Bluetooth and network streaming capabilities, users can easily access high-resolution audio files from their digital libraries or popular streaming services.

One of the key technologies in the AVR600 is its advanced room correction system, known as Dirac Live. This sophisticated calibration tool analyzes the acoustics of the room and automatically adjusts the output of the receiver to compensate for any sound anomalies. As a result, listeners experience optimized sound tailored to their specific environment, enhancing the overall listening experience.

For video performance, the AVR600 supports a range of formats, including Dolby Atmos and DTS:X, ensuring an immersive home theater experience with enveloping surround sound. It also features advanced video processing capabilities, allowing users to upscale standard-definition and high-definition content to near 4K quality, further enhancing picture clarity.

In terms of user interface, the AVR600 provides an intuitive on-screen display and a well-designed remote control that makes navigating through settings and options seamless. The receiver is also compatible with smartphone apps for additional convenience, allowing users to control playback and settings directly from their mobile devices.

Overall, the Arcam AVR600 is a versatile audio-visual receiver that combines power, connectivity, and advanced technologies to create an exceptional home entertainment experience. Its unique blend of performance and flexibility makes it an excellent choice for those looking to invest in high-quality audio and video solutions for their homes.
Top Page Image Contents