Arcam Resolving Common Problems with AVR600 Home Theater Systems
Page 56

trouble­ shooting

Problem

Check that...

There are no lights on the unit

< the power cord is plugged into the AVR600 and the mains socket it is

 

plugged into is switched on.

 

< the power button is pressed in.

 

If a red LED is present, the AVR600 is in standby mode. Press any button on the

 

front panel or remote control.

The unit responds erratically

< there are fresh batteries in the remote control.

or not at all to the remote

< the front panel window is visible and you are pointing the remote control

control

towards it.

The front panel display is

< the display hasn’t been turned off. Press the DISPLAY button on the front

blank

panel or remote control.

No picture is being produced

< your viewing device is turned on and switched to display your AVR600. Test

 

by pressing the MENU button on the AVR600 or on the remote and look for

 

the main menu screen on your display device.

 

< the correct video input is selected on the AVR600.

 

< the video source is on, is operating normally, and is in ‘play’ mode if

 

appropriate.

 

< you have the AVR600 in a video resolution that is compatible with the

 

connection you are using and with your display device. For example,

 

composite video is only capable of carrying 480i and 576i resolutions. Test

 

this by pressing and holding the OK key for more than two seconds to force

 

480i / 576i output resolutions.

There are bright edges or

< the cables used for analogue video connections are designed to carry video

‘ghosts’ on the picture

(i.e., they are 75Ω coaxial cables).

 

< ensure the ‘sharpness’ control on your display device is switched off or set to

 

near minimum.

 

< for HDMI connections, try using a shorter cable or alternatively a different

 

brand.

No sound is produced

< the correct input has been selected.

 

< the source equipment is on, is operating normally and is in ‘play’ mode if

 

appropriate.

 

< the volume is turned up to a reasonable level and the AVR600 is not in mute

 

mode.

The sound is poor or distorted < you have not excessively increased the input sensitivity (i.e. reduced the maximum input signal voltage) in the Input Config. menu if an analogue input is being used.

<you have selected the correct size of speakers to suit your system in the setup menu.

E-54

Page 55 Page 57
Image 56
Page 55 Page 57
Contents AVR600 N d b o o k AVR surround amplifierSafety Guidelines Important safety instructionsSafety compliance Class II productRespect des consignes de sécurité Class II produitInstructions de sécurité importantes Page Contents Professional Installation?DIY setup? WelcomeBefore you Begin… Power Standby powerPlacing the unit Interconnect cablesTrademark acknowledgements Video connectors Digital connectorsAudio connectors Power inletHdmi connectors GeneralMaking connections Component/RGB Video CompositeZone 3 connectors Zone 2 connectorsDigital audio connectors Connect the Component video outputs of your sourcePhono Analogue audio Front panel AUX input MCH input InputsAnalogue record outputs Front panel Phones socketEnglish DVD player Satellite receiverCD player Use the Composite connection if HdmiConnecting an iPod using the Arcam rDock Sirius Radio ConnectorsAerial connectors Connecting an aerial Other Connectors Data connectors Network connectors USB connectorRS232 serial connector RLead/rDockRoom English Trigger connectorsInfra-red IR connectors Speakers Connecting speakersConnecting subwoofers Speaker cables Centre SubwooferFront left and right Surround left and rightSwitching on OperationOperating your AVR600 Selecting a sourceUsing Zone 2 Updating firmware using a PCRestore to factory defaults Extended front panel menuFront panel Operation Using the remote control CR102 universal remote controllerInserting batteries into the remote control Device Mode / Source keys Useful informationControlling other devices Code blink-backOK selects/play the highlighted file AMP Device ModeIPod commands TUN Device Mode DVD Device ModeNetwork commands Highlighted menu on the screenMenus SAT Device ModeAV Device Mode PVR Device Mode VCR Device ModeCD Device Mode English Essential Setup Speaker typesSpeaker Distances Speaker LevelsAuto speaker Setup ProblemsUsing a subwoofer Very strong acoustic resonances within the roomSetup menus Navigating the setup menuInput Config Treble BassGeneral information and system controls General SetupPlii Dimension Plii Centre Width Plii Panorama Auto Setup Spkr TypesSpkr Distance Spkr LevelsVideo Inputs Video OutputsImportant points to remember For analogue outputsZone Settings ModeNetwork For Stereo sourcesTwo-channel source modes Decoding ModesIntroduction High resolution audio sources Multi-channel source modesDecoding modes For Dolby Digital sourcesSettings Volume LevellerDolby Volume is a sophisticated new Calibration OffsetEnglish Tuning/Channel Selection Saving and selecting PresetsDeleting Presets Tuner OperationSirius errors Default unlock code isOperation Locking ChannelsNetwork/usb Operation Selecting the playback sourceUSB playback Internet radio stationsExternal Amplifiers SW2, SW3Multi-room Set up ZoneZone 2 and 3 control outputs Audio outputsZone English Customising CR102 Code LearningKey Mover Volume punch-throughCreating Macros Mode Mover Locking/Unlocking a specific Device ModeTo restore a moved Device Mode key to its original state Copy a key between Device ModesMode key IR punch-through Resetting the CR102Problem Check that Volume is always too loud When I turn onSwitched off Wired networkSpecifications Continual improvement policyProduct Guarantee Worldwide GuaranteeClaims under guarantee Problems?Device code Tables HCM ICEIRT ITCRFT SBRSEG SEIAVP GPXKEC KLHADB NTLUPC DKKCAT CGVDCE ENGAsci SKY+TPS UECYES SH215E Issue 4301-7333+0
Related manuals
Manual 74 pages 35.94 Kb Manual 74 pages 48.95 Kb Manual 68 pages 17.1 Kb

AVR600 specifications

The Arcam AVR600 is a high-performance AV receiver that is designed for audiophiles and home cinema enthusiasts who seek a premium audio and video experience. This receiver stands out with its array of features and technologies that elevate sound quality and user experience.

At the heart of the AVR600 is its high-fidelity amplification system. The receiver is equipped with a robust 7-channel amplification setup, delivering a total output of 120 watts per channel into 8 ohms. This power enables the AVR600 to reproduce dynamic audio with precision, whether it be for movies, music, or gaming. The class G amplifier design offers exceptional efficiency and reduces distortion, ensuring that sound remains clean and focused even at higher volumes.

The AVR600 boasts extensive connectivity options to accommodate various audio and video sources. It features multiple HDMI inputs and outputs supporting 3D video and 4K scaling, providing flexibility for connecting modern devices. The unit also includes analog and digital inputs, a dedicated phono input for vinyl enthusiasts, and support for multi-room audio setups. With its built-in Bluetooth and network streaming capabilities, users can easily access high-resolution audio files from their digital libraries or popular streaming services.

One of the key technologies in the AVR600 is its advanced room correction system, known as Dirac Live. This sophisticated calibration tool analyzes the acoustics of the room and automatically adjusts the output of the receiver to compensate for any sound anomalies. As a result, listeners experience optimized sound tailored to their specific environment, enhancing the overall listening experience.

For video performance, the AVR600 supports a range of formats, including Dolby Atmos and DTS:X, ensuring an immersive home theater experience with enveloping surround sound. It also features advanced video processing capabilities, allowing users to upscale standard-definition and high-definition content to near 4K quality, further enhancing picture clarity.

In terms of user interface, the AVR600 provides an intuitive on-screen display and a well-designed remote control that makes navigating through settings and options seamless. The receiver is also compatible with smartphone apps for additional convenience, allowing users to control playback and settings directly from their mobile devices.

Overall, the Arcam AVR600 is a versatile audio-visual receiver that combines power, connectivity, and advanced technologies to create an exceptional home entertainment experience. Its unique blend of performance and flexibility makes it an excellent choice for those looking to invest in high-quality audio and video solutions for their homes.
Top Page Image Contents