Canon XL1 Adjusting the Viewfinder Unit, Adjusting for left eye/right eye operation

E

Adjusting the Viewfinder Unit

The camera is supplied with the viewfinder unit and cable attached to the camera.

•Check that the viewfinder cable is firmly attached to the camcorder.

•Remove the protective rubber from around the locking screw.

Adjusting for left eye/right eye operation

1, 2 3

Preparation

You can slide the viewfinder unit along the bracket to a position that best suits you — for use with either the left or right eye.

1. Loosen the locking screw and slide the unit to the position you require along the bracket.

2. Tighten the locking screw.

3. Switch the eye cup around (if necessary).

• Slide and hold the release lever on the	Right eye use	Left eye use
underside of the viewfinder and then twist the
eye cup counter-clockwise (until the mark on
the eye cup lines up with the mark on the
viewfinder) to allow you to remove it from
the viewfinder. Replace, with the eye cup
facing the opposite direction, by lining up the
marks and twisting the cup clockwise until it
locks into place.

10