Canon XL1 instruction manual Mounting and Removing XL Lenses, Mounting the lens, Removing the lens

Mounting and Removing XL Lenses

Any lens bearing the mark can be used with this camcorder.

E

Mounting the lens

1.Remove the dust cap from the lens and the body cap from the camcorder.

2.Align the red dot on the camera body with the mount positioning point (the red dot) on the lens, then turn the lens clockwise until it clicks and locks into place.

Preparation

Removing the lens

LENS RELEASE

1.Slide and hold the LENS RELEASE switch and turn the lens counter-clockwise until it stops. Then, remove the lens from the camera body.

2.When you are not using the lens or camera, be sure to replace the dust cap and body cap.

8