Easy Wireless Flash Shooting
Select [Built=in flash rune.
setting].
®Select [Built-in flash func. setting], then press <8>.
5 Select [EasyWireless].
®For
Set [Channel].
®Set the channel
Take the picture.
®As with normal flash shooting, you can set the camera and take the
picture in the same way.
Exit the wireless flash shooting.
®For
[] | ;,_ setting [E,TTL II meter.] | tO [Evaluative] | is recommended. | |||
| ® | With | [EasyWireless], | even if you disable | the | |
|
| wi!l Stil! fire to £ont[o! | the | Slave Unit. Depending On Sheeting Conditions, | ||
|
| the flash fired to cont[o! the slaye unit may appear in the picture. | ||||
| ® | Firing | a test flash is not possible with the | slave unit. |