CustomWirelessFlashShooting
[=_ (A:B)] Multiple slave units in multiple groups
Divide the slave units into groups A and B, and change the flash ratio to obtain the desired lighting effect.
Refer to your Speedlite's instruction manual to set one slave unit's slave ID
to A (Group A) and the other slave unit's
ID to B (Group B) and position them as shown in the illustration.
_ Select [Wireless func.].
®Follow step 2 on page 194 to select [_=_], then press
3 Set the desired flash ratio and
take the picture.
®Select [A:B fire ratio] and set the flash ratio.
if Firin | g | group | ] | iSSet{o[, | = | (A:B)] | , | groUp C will not fire |
[ |
|
| . |
| ||||
[] The 8:i | to i:ite |
| li8 flash iatio is equivalent to 3:1 tOiii to i:3 Stops(i i2- |
stop increments).
196