Custom Wireless Flash Shooting
Fully-automatic Shooting with Multiple External Speedlites
Multiple Speedlite slave units can be treated as one flash unit or separated into slave groups whose flash ratio can be set.
The basic settings are shown below. By changing the [Firing group] setting, you can shoot with various wireless flash setups with multiple Speedlites.
Basic | settings: |
|
Flash | mode | : E=TTL II |
E=TTL II meter, | : Evaluative | |
Wireless func. | : _=_ | |
Channel | : (Same as slave units) |
[=_AII] Using multiple slave Speedlites as one flash unit Convenient when you need a large flash
output. All the slave Speedlites will fire at the same output and be controlled to obtain a standard exposure.
No matter what the slave ID is (A, B, or
C), all the slave units will fire as one
group.