Setting the Flash _
The
Speedlite function settings only if the attached
compatible with this function.
The setting procedure is the same as setting a camera menu function.
Select [Flash control].
_ Under the ITS']tab, select [Flash control], then press
_y,,The flash control screen will appear.
[Flash firing]
_, Normally, set this to [Enable].
<_ if [Disable] is set, neither the built- in flash nor the external Speedlite
will fire. This is useful when you only want to use the flash's
beam.
E.TTLnMeteringModes
_ For normal flash exposures, set this to [Evaluative].
_ [Average] is for advanced users. As with an external Speedlite, the metering area is averaged. Flash exposure compensation may be necessary.
[] Even if [Flash firing] has been Setto [Disable], if focus is difficult to achieve in !ow light, _he bui!t:in flash may sti!l fire a series of f!ashes (AF:assist
beam, p.86).