Canon HV20 Viewing Still Images, Image Jump, Push the joystick or and hold it pressed down

Viewing Still Images

( 10)

1Holding the lock button pressed

down, set the switch to PLAY.

2Move the / switch to (memory card).

3Select ( ) the still image. You can use the joystick to move through the still images even if the joystick guide above does not appear on the screen.

Playback 33

IMPORTANT

Avoid the following actions while the card

access display appears on screen, and when the CARD access indicator is on or flashing. Failing to do so may result in permanent data loss.

-Do not open the memory card slot cover and do not remove the memory card.

-Do not disconnect the power source or turn off the camcorder.

-Do not change the position of the / switch or the operating mode.

The following may not be displayed correctly.

-Images not recorded with this camcorder.

-Images edited on or uploaded from a computer.

-Images whose file names have been changed.

Image Jump

You can jump ahead to a specific image without having to browse all images one by one.

TO RUN THROUGH THE STILL IMAGES

Push the joystick ( ) or ( ) and hold it pressed down.

Release the joystick when the running number gets to the number of the image you want to display.

Basic Functions