Canon HV20 instruction manual Printing, Editing, Others, Memory Card Operation Problem

		Trouble?	87
Memory Card Operation
Problem		Solution
Memory card cannot be	Memory card was not facing the correct direction. Turn the		20
inserted.	memory card over and reinsert it.
Cannot record on the memory	Memory card is full. Erase still images to free some space or		64
card.	replace the memory card.
	Memory card was not initialized. Initialize the memory card.		65
	The folder and file numbers have reached their maximum value.		40
	Set [FILE NOS.] to [RESET] and insert a new memory card.
Memory card cannot be played	Set the camcorder to	.	33
back.
Image cannot be erased.	Image is protected. Cancel the protection.		64
“ ” flashes in red.	Card error occurred. Turn off the camcorder. Remove and		65
	reinsert the memory card. Initialize the memory card if flashing
	persists.
Printing
Problem		Solution
The printer is not operating	Disconnect the USB cable and turn off the camcorder and the		–
even though the camcorder	printer. After a short while, turn them on again, set the
and printer are correctly	camcorder to	mode and restore the connection.
connected.
Editing
Problem		Solution
Cannot record with this	Set [AV DV] to [OFF].		39
camcorder video input from an	Wrong signal standard. Refer also to the instruction manual of		–
external video device
	the connected device.
connected to the HDV/DV
	Dubbing may work using the AV/ terminal.
terminal using a DV cable.
Others
Problem		Solution
A rattling can be heard from the	The internal lens fixture can move when the camcorder is turned		–
camcorder.	off. This is not a malfunction.

Additional Information