Canon HV20 SET Print Order, Readjust Trimming, Printer Error, Hardware Error, Communication

90	Trouble?
	Message	Explanation/Solution
SET	PRINT ORDER	No still image on the memory card has been marked with a print order.
READJUST TRIMMING		You changed the print style after you set the trimming settings.
PRINTER ERROR		Cancel printing. Turn the printer off and then on again. Check the printer
		status. If the error still persists, refer to the printer’s instruction manual and
		contact the appropriate customer support center or service center.
HARDWARE ERROR		Cancel printing. Turn the printer off and then on again. Check the printer
		status. If the printer is equipped with a battery, it might be exhausted. In
		such case, turn off the printer, replace the battery and turn it back on.
COMMUNICATION		The printer is experiencing a data transfer error. Cancel printing.
ERROR		Disconnect the USB cable and turn off the camcorder and the printer. After
		a short while, turn them on again, set the camcorder to		mode
		and restore the connection. When you are printing using the		button,
		check the print settings. Or, you attempted to print from a memory card that
		contains a large number of images. Reduce the number of images.
CHECK PRINT SETTINGS		The print setting cannot be used for printing with the	button.
PRINTER IN USE		The printer is in use. Check the printer status.
PAPER LEVER ERROR		Paper lever error occurred. Adjust the paper selection lever to the proper
		position.
PRINTER COVER OPEN		Close the printer cover securely.
NO PRINTHEAD		No print head is installed in the printer or the print head is defective.