Canon CP-200, CP-300 manual Turning On the Printer, Place the printer on a flat surface

Page 32

Turning On the Printer

5

1

4

2

3

 

 

 

To Power Outlet

Compact

At least 10 cm (4 inches) Power Adapter of open space

Refer to the above figure during the following procedure (the numbers in the figure correspond to the steps in the procedure).

1 Place the printer on a flat surface.

When printing, the paper temporarily projects out from the rear, so allow a clear space of at least 10 cm (4 inches) at the back.

2 Connect the supplied power cord to the CA-CP100 Compact Power Adapter (also supplied).

3

4

5

Plug the power cord into a power outlet.

Connect the Compact Power Adapter cable to the printer.

At this point the CP-200 is ON, so the printer’s indicator lights green.

Press the ON/OFF button (only on the CP-300).

When the printer is turned on, the printer’s indicator lights green.

To Turn the Printer Off

With CP-300: Press the ON/OFF button, releasing it when the indicator turns off.

With CP-200: Unplug the Compact Power Adapter from the printer (the indicator turns off).

When making connections, confirm that the shape of the plug matches the shape of the socket on the device being connected.

The power outlet where the printer’s power plug is connected should be located where the plug can be easily removed if a problem occurs.

32

Image 32
Contents User Guide Contents Appendices Safety Precautions Read This First About the ManualsPrinting Flow Diagram Install the necessary softwareAbout the Connection Cable PrintingInstalling the Software from the CP Printer Solution Disk InstallingThis concludes the software installation Uninstalling Installing the Printer Driver Windows 98/Me/2000Windows Page Click the Next button Do not select CD-ROM drive Printer driver is installed Windows Me Now you can continue and install the printer driver Page Printer driver is installed After a moment, the Found New Hardware Wizard dialog appears Do not select CD-ROM drives Page Click the Next button Windows XP When the following message appears, click the Finish button Page Page Example Uninstalling Click the Exit button Turning On the Printer Place the printer on a flat surfaceConnecting the Printer to Your Computer USB port On computer USB cable Printing Starting ZoomBrowser EX Selecting an Image for PrintingClick 1 Select Images and click an image you want to print Click 2 Select Captions for Printing and select captions Selecting a Print Mode Setting the Printer Driver for Printing Select the paper size, and then click the Finish buttonClick the Properties button Page Adjust other settings, and then click the Print button Printing Duplicate Images on an 8-Label Sheet Click the Print button to start printing Printing Different Images on an 8-Label Sheet Printing Part of an Image Trimming Clip button Printing with Image Quality Correction Images captured with Exif Compatible cameras Other Printing Functions Print Area AppendicesAbout the Print Area and Pixels Postcard size sheet Number of Pixels Paper Type Total numberTroubleshooting This section describes how to troubleshoot problemsPrinting stops while it is in progress Error Messages Errors where printing can resumeCause There is no more ink in the ink cassette Correction Insert the correct paper cassette Errors where printing is canceled Cause There is a problem with the ink cassetteProblem with the printer Turn printer off and back on
Related manuals
Manual 61 pages 14.14 Kb