Canon CP-300, CP-200 manual Printing Part of an Image Trimming

Printing Part of an Image (Trimming)

You can select and then print a portion of an image (trimming). This is useful when you only want to print part of an image, or if the part you are most interested in is not at the center of the image.

• You can print selected portions of an image in any print mode.

• The length-to-width ratio cannot be modified if you select the settings below.

“CP-300 (or CP-200) standard printing - Borderless” “CP-300 (or CP-200) multiple printing”

•Also, because a 1 - 3 mm border is trimmed from the image during printing, we recommend that you select an area that is slightly larger than the part of the image you want to print.

1Right-click the image you want to print, and then select [Clip/ Correct Photo].

If you specify borderless or select multiple printing as the print mode, a frame appears for you to select the area to print.

47