Canon CP-300, CP-200 manual Problem with the printer Turn printer off and back on

Page 61

Error occurred during communication.

Check the printer power and printer connections.

Cause : Power to the printer goes off while printing is in progress.

Correction : Make sure the indicator light on the printer is green. (➡ p.32)

Cause : The cable came loose or was disconnected while printing was in progress.

Correction : Check to make sure the USB cable is connected correctly. (➡ p.33)

If the USB cable is not properly connected, communication problems may occur. Make sure that the printer is connected to your computer’s root hub port with suitable USB cable, and then try printing again.

Problem with the printer.

Turn printer off and back on.

Cause : The printer unit cannot be initialized successfully.

Correction : Turn the printer’s power off and back on again. Start the print job over.

Cause : There is too much paper in the paper cassette.

Correction : Remove paper from the paper cassette, and then make sure to load the correct amount of paper in the paper cassette.

For messages caused by errors related to the operating environment of your computer, follow the messages on the screen.

CDP-E023

© 2003 CANON INC.

61

Image 61

Contents User Guide Contents Appendices Safety Precautions About the Manuals Read This FirstInstall the necessary software Printing Flow DiagramPrinting About the Connection CableInstalling Installing the Software from the CP Printer Solution DiskThis concludes the software installation Uninstalling Windows 98/Me/2000 Installing the Printer DriverWindows Page Click the Next button Do not select CD-ROM drive Printer driver is installed Windows Me Now you can continue and install the printer driver Page Printer driver is installed After a moment, the Found New Hardware Wizard dialog appears Do not select CD-ROM drives Page Click the Next button Windows XP When the following message appears, click the Finish button Page Page Example Uninstalling Click the Exit button Place the printer on a ﬂat surface Turning On the PrinterConnecting the Printer to Your Computer USB port On computer USB cable Printing Selecting an Image for Printing Starting ZoomBrowser EXClick 1 Select Images and click an image you want to print Click 2 Select Captions for Printing and select captions Selecting a Print Mode Select the paper size, and then click the Finish button Setting the Printer Driver for PrintingClick the Properties button Page Adjust other settings, and then click the Print button Printing Duplicate Images on an 8-Label Sheet Click the Print button to start printing Printing Different Images on an 8-Label Sheet Printing Part of an Image Trimming Clip button Printing with Image Quality Correction Images captured with Exif Compatible cameras Other Printing Functions About the Print Area and Pixels AppendicesPrint Area Postcard size sheet Paper Type Total number Number of PixelsThis section describes how to troubleshoot problems TroubleshootingPrinting stops while it is in progress Errors where printing can resume Error MessagesCause There is no more ink in the ink cassette Correction Insert the correct paper cassette Cause There is a problem with the ink cassette Errors where printing is canceledProblem with the printer Turn printer off and back on

Related manuals

Manual 61 pages 14.14 Kb