Madrigal Imaging N380 manual Important Safety Instructions

Page 3

Important Safety Instructions

Please read all instructions and precautions carefully and completely before operating your Mark Levinson® power amplifier.

1.ALWAYS disconnect your entire system from the AC mains before connecting or disconnecting any cables, or when cleaning any component.

2.This product must be terminated with a three-conductor AC mains power cord which includes an earth ground connection. To prevent shock hazard, all three connections must ALWAYS be used.

3.AC extension cords are not recommended for use with this product.

4.NEVER use flammable or combustible chemicals for cleaning audio components.

5.NEVER operate this product with any covers removed.

6.NEVER wet the inside of this product with any liquid.

7.NEVER pour or spill liquids directly onto this unit.

8.NEVER block air flow through ventilation slots or heatsinks.

9.NEVER bypass any fuse.

10.NEVER replace any fuse with a value or type other than those specified.

11.NEVER attempt to repair this product. If a problem occurs, contact your Mark Levinson® re- tailer.

12.NEVER expose this product to extremely high or low temperatures.

13.NEVER operate this product in an explosive atmosphere.

14.ALWAYS keep electrical equipment out of the reach of children.

15.ALWAYS unplug sensitive electronic equipment during lightning storms.

Image 3
Contents Operating Manual Page Important Safety Instructions Page Table of Contents Unpacking and Placement Operating Voltage Quick Start… Front Panel Mode Indicators Standby Button Preamplifier Nº380 Rear PanelMale RCA Male XLR Connect to source Record Outputs External IR Input Remote Control Mute Setup and Installation Not Used any unused input Until the Name you desire appears in the display If the Source in Question is a Recordable DEVICE… Decide Which Source has the Highest Output Press and Hold the Mode Button on the Front Panel This will be the preferred, programmed level Press and Hold the Mute Button Adjust the Volume Knob to Your Preferred Setting Display will NOW Time OUT and Return to Normal Operational Modes Balance mode Balance control tip Using Surround Sound Processors SSP must not be in a tape loop Ground Isolation Adaptor Linked Functions Care and Maintenance Canadian Warranty Obtaining Service Inputs SpecificationsDimensions Madrigal Audio Laboratories