Madrigal Imaging N380 manual Obtaining Service

Page 37

Important!

Warning!

Obtaining Service

We take great pride in our dealers. Experience, dedication, and integrity make these professionals ideally suited to assist with our customers’ service needs.

If your Mark Levinson component must be serviced, please contact your dealer. Your dealer will then decide whether the problem can be remedied locally, or whether to contact Madrigal for further service information or parts, or to obtain a Return Authorization. The Madrigal Technical Services Department works closely with your dealer to solve your service needs expediently.

Return authorization must be obtained from Madrigal’s Technical Services Department BEFORE a unit is shipped for service.

It is extremely important that information about a problem be explicit and com- plete. A specific, comprehensive description of the problem helps your dealer and the Madrigal Technical Services Department locate and repair the difficulty as quickly as possible.

A copy of the original bill of sale will serve to verify warranty status. Please in- clude it with the unit when it is brought in for warranty service.

All returned units must be properly packaged (preferably in their original packing material), and the proper return authorization numbers must be marked on the outer carton for identification. If the packaging to protect the unit is, in our opinion or that of our dealer, inadequate to protect the unit, we reserve the right to repackage it for return shipment at the owner’s expense. Neither Madrigal nor your dealer can be responsible for shipping damage due to improper (that is, non-original) packaging.

Your dealer can order a new set of shipping materials for you if you need to ship your component and no longer have the original materials. There will be a charge for this service. We strongly recommend saving all packing materials in case you need to ship your unit some day.

37

Image 37
Contents Operating Manual Page Important Safety Instructions Page Table of Contents Unpacking and Placement Operating Voltage Quick Start… Front Panel Mode Indicators Standby Button Preamplifier Nº380 Rear PanelMale RCA Male XLR Connect to source Record Outputs External IR Input Remote Control Mute Setup and Installation Not Used any unused input Until the Name you desire appears in the display If the Source in Question is a Recordable DEVICE… Decide Which Source has the Highest Output Press and Hold the Mode Button on the Front Panel This will be the preferred, programmed level Press and Hold the Mute Button Adjust the Volume Knob to Your Preferred Setting Display will NOW Time OUT and Return to Normal Operational Modes Balance mode Balance control tip Using Surround Sound Processors SSP must not be in a tape loop Ground Isolation Adaptor Linked Functions Care and Maintenance Canadian Warranty Obtaining Service Inputs SpecificationsDimensions Madrigal Audio Laboratories