Minolta 2163-910 Rewinding the Film, Wait until the film is, Completely rewound, Manual Rewind

Page 13

9222-2163-11 MM-B108 (E).qxd 01.8.3 16:11 Page 24

FILM

Rewinding the Film

After you have exposed the last frame, the camera will automatically rewind the film.

1

Wait until the film is

 

completely rewound.

will appear and will blink on

the data panel, indicating it is safe to open the back-cover.

• The film-chamber lock indicator is blank after the film is rewound.

2 Press the back-cover release to open the back cover and remove the film, then close the back cover.

Do not turn the focusing ring when the film is rewinding.

Although more pictures than specified on the film package may be taken, the film processor may not print more than the number specified on the film cartridge.

Manual Rewind

Use manual rewind to rewind the film before the roll is finished.

Gently press the manual- rewind button using a pen.

• Only use blunt objects. Sharp objects may damage the camera.

will appear and will blink on the data panel when the film has rewound.

Custom Function Notes

Cust-2: Automatic (1) or manually initiated (2) rewind start (p.108).

Cust-3: Rewind the leader into the cartridge (1) or leave the leader out (2) (p.109).

FULLY-AUTOMATIC

OPERATION

Use full-auto when you are just starting out or when shooting under conditions that would require you to constantly adjust the focus or exposure.

Program-reset button (p.30)

24

25

Image 13
Contents Appendix Table of Contents Detailed Operation Table of ContentsFor Proper and Safe USE For Proper and Safe USE Quick Operation Body Names of PartsData Panel Names of PartsViewfinder Strap Using the Eyepiece CapAttaching the Strap Battery Condition Indicators Installing the BatteriesBatteries Attaching the Lens LensLens caps Removing the LensFilm-chamber Lock FilmRewinding the Film Gently press the manual- rewind button using a penWait until the film is Completely rewoundPressing the Shutter-release Button Handling the Camera EYE-STARTTurning Eye-start on Turn the function dial toCanceling Eye-start Audio SignalCanceling the Audio Signal Turning the Audio Signal OnTaking Pictures in FULL-AUTO Focus Focus SignalsSpecial Focus Situations Focus cannot be confirmed BlinkingFlash Signals Using the BUILT-IN FlashFocus Lock Center your subject in the wide Focus frameFlash Cancel Using the BUILT-IN FlashFlash Range Lens ShadowingWhen you release the button, Canceling Red-eye ReductionRed-Eye Reduction Until Appear on Data panelPortrait SUBJECT-PROGRAM SelectionLandscape Close-up SUBJECT-PROGRAM SelectionSports Photograping Night Scenes Night PortraitDrive Modes Self-timerCenter your subject in the focus frame Continuous Adavance Drive ModesFor Owner’s of the Remote-control Model Shutter-release button Focus Lock in Remote Control ModeRecompose the picture Lift your finger fromShutter Control Aperture ControlExposure Modes Mode Aperture PriorityFlash with a Mode Mode Aperture PriorityCanceling the Flash Press the flash-mode button to pop-up the built-in flashDepth-of-field Preview Mode Shutter PriorityControl dial until S appears Select the shutter speedMode Shutter Priority Mode ManualFlash with S Mode Flash with M mode Mode ManualEv Scale in the Viewfinder Control dial to change Shutter speeds ModeBright Light Exposure WarningsLow Light Taking Time Exposures p.81 Multiple Exposures p.90Wide Focus Area Focus AreaSpot Focus Area Local Focus Areas Focus AreaAutomatic AF Continuous AF Focus ModesAppears on the data Single-Shot AF Focus ModesManual Focus Segment Honeycomb-Pattern Metering AF IlluminatorSpot Metering Subject in the center Subject on the rightSpot-AE Lock Exposure AE-LOCKMount the camera on a tripod. Set the camera to M mode p.61 Ev Scale Display When Using the Spot-AE LockExposure AE-LOCK With the object to be meteredAttaching the Remote Cord Sold Separately Using the Remote-Control with BulbSold SeparatelyChecking Exposure Compensation Exposure CompensationExposure Bracketing Setting the ISO ManuallyTo set the bracketing IncrementExposure Bracketing Stop From blinking Multiple ExposureRepeat 4 and 5 for each Additional exposure Down to take the lastFlash Canceling Multiple ExposureMultiple Exposure Metering Multiple ExposureFlash Attaching the Accessory FlashFlash Metering Pre-flash meteringSlow Sync Attach the accessory flash toHIGH-SPEED Sync HSS High-speed sync HSSSetting Wireless/Remote Flash Mode WIRELESS/REMOTE FlashNormal flash Wireless flash With the camera and flash on Turn the function dial toTaking Pictures in Wireless/Remote Flash Mode WIRELESS/REMOTE FlashWireless/Remote Ratio Flash 100 101102 103 Canceling Wireless/Remote Flash ModeImprinting the Date or Time 104 105 Setting the Date or TimeFor Owners of the Quartz Date Model Changing the Date FormatCustom Functions Setting Custom Functions106 107 Turn the function dial to any Position other than CustCustom Functions 108 109110 111 Custom 8 P Mode SettingsCustom 6 Focus-hold Button Lens Custom 7 Eyepiece Sensor Activation112 113 Following settings will not change PROGRAM-RESET Button114 115 Accessory Flashes Accessory Information116 117 Lenses118 119 Accessory Information120 Trouble Shooting122 123 Care and Strage124 125 Specifications126 127 IndexSubject MM-B108