
WIRELESS/REMOTE FLASH
Canceling Wireless/Remote Flash Mode
1 Attachera. the flash to the cam-
• The camera and flash should be on.
FOR OWNERS OF THE QUARTZ DATE MODEL
The
•Imprinted data may be difficult to read if the
•Do not use the data back when temperatures are outside the range of 0° to 50°C (32° to 122°F).
•Since the date is recorded when the film is advanced to the next frame, sometimes the last frame of the roll will not have the date printed on it.
2 Turn the function dial to 
.
Date button | Select button |
|
3 While pressing the function | Imprinting the Date or Time |
| ||
|
| |||
button, turn the control dial | 1 | Press the date button to | ||
until | and | appear | ||
on the camera’s data panel. |
| choose the date imprinting | ||
| format. | |||
|
|
|
| |
|
|
| • | The display changes as follows: |
4 Detach the accessory flash.
DETAILED | OPERATION |
•Turning off the main switch of the camera with the accessory flash attached also cancels wireless flash. If the flash is not attached, the flash’s wireless/remote function will not be canceled. If this happens, see the flash’s instruction manual to cancel the function.
2 Press the
102 | 103 |