Madrigal Imaging AVP2 owner manual Setting & saving input levels

Page 51

setting & saving input levels

The AVP2 can provide this automatic searching for and selection of the best avail- able soundtrack for you, according to priorities you establish during setup. In es- sence, you are about to describe the order in which you want the AVP2 to look for signals, establishing your first, second and third choice. Typically, this will be RF (AC-3, Dolby Digital), normal digital (which might be a digital version of Dolby Pro Logic, DTS discrete digital, MPEG/Musicam, or ordinary two-channel digital stereo), and finally analog (if there is no digital signal available).

Let’s get started.

1MOVE TO THE “AUDIO CONNECTORS:” ITEM IN THE MENU, PRESS THE ENTER BUTTON, AND USE THE VOLUME ± BUTTONS TO INFORM THE SYSTEM HOW MANY CONNECTIONS ARE NEEDED; PRESS ENTER AGAIN TO SAVE THE CHANGE

Choose 3 audio connectors if you have an AC-3 RF output on your laserdisc player, 2 audio connectors if you have only analog and digital out- puts. Once the AVP2 knows how many connections you need for this par- ticular component, it updates its menu to provide for defining those con- nections.

2DEFINE CONNECTOR “1:” AS YOU DID FOR THE CD TRANSPORT, USING YOUR FIRST CHOICE CONNECTION PREFERENCES FOR LASERDISC; SAVE YOUR CHOICES BY PRESSING ENTER

If you have an RF (AC-3)-equipped laserdisc player and the Audio Video Preamplifier’s optional internal RF demodulator installed, this choice should

be digital (vs. analog) and dig 3 RF. Otherwise, you probably have only two

connections that need to be made, digital and analog; in this case, you’ll 51 want to choose digital and whatever input you used during hookup for

your laserdisc player’s digital output.

3REPEAT THIS PROCESS FOR YOUR SECOND CHOICE (2:) AND THIRD CHOICE (3:) CONNECTIONS AS NEEDED

With three connections, your second choice will be digital, with the third choice being analog. If you chose to set up two connections (lacking an RF output), then your second connection will be your analog hookup. Choose audio: analog in the submenu, and then choose the analog input where you hooked up the analog connections from your laserdisc player). Save your choices by pressing enter.

The AVP2 includes a high quality analog to digital converter (ADC). Since all pro- cessing in the AVP2 is handled in the digital domain, analog signals that are to be changed in any way (other than volume) must first be converted to digital form.

It is extremely important to avoid overloading or “clipping” the ADC, since doing so results in a nasty burst of distortion that sounds similar to a power amplifier clipping. Unlike power amplifiers, this sort of clipping can occur at any volume level, since the ADC is being clipped well before the volume control in the signal path.

Fortunately, the AVP2 can detect when its ADC is being clipped, and posts a no- tice to that effect in its front panel display and on the on screen display. If over- load should occur, the AVP2 will indicate it by displaying ADC CLIPPING on the screen (and “Clip!” in the main display). If you see such a message, you should turn down the input level on the AVP2 (which turns down the volume of the sig-

Page 50 Page 52
Image 51
Page 50 Page 52
Contents AVP2 Page Important Safety Instructions Table of Contents Important note About your subwoofer 86-88 Them Maximizing the Value Your PurchaseUnpacking and Placement Serial number Register your purchase Operating Voltage Frequency Word About Installation Quickest Start CD & DVD Quick Start For CD Quick Start For DVD Special Design Features S E R Front PanelTip Surround Mode Display Intensity Delay Mute Center A l o g i n p u t s G i t a l i n p u t s D e o P u t s Rear PanelMale RCA Male XLR Connect to source Video connector Balanced Main Outputs L, C, R Record Outputs Digital Output 15 RS-232 Port IR Input Installation Note Page Remote Control So the menu item may Using The Menu System Page Once in the menu system, the front panel equivalents are Operate Menu Important Note Page Display timeout Display of text Display background color Page Maximum volume Late night SET Configuration Setup MenuDefine source buttons Example setting up a cd transport Renaming source buttons Defining the input type Setting audio delay Choosing a 2-channel mode Page Move to the 1 Item in the MENU, Press the Enter Button Arrow cursor will change to the change-it cursor → Setting & saving input levels Turn the Master Volume Control on the AVP2 Down Set speakers SET Speakers SET Configuration Front L&R 70Hz HPF Center 80Hz HPF Rear L&R 80Hz HPF Special tip Enter the SET Distance Menu Save ALL Your Changes and Return to the SET Speakers Menu Repeat this Process for Each Speaker in Turn Enter the Bass Level Manager Menu and Choose Test Signal on Surround Mode Defaults Defaults Disabled Select the Surround Mode YOU would Like to Modify Page Custom Menu Enter the Setup Menu Select CUSTOM, and then Teach Remote Displays the status screen Select Dolby Pro Logic II Music Trigger settings Enter the Custom Menu Toggle the Menu Item from Remote to Local About… Menu Using the Special Menu Source DVD Using the AVP2 Overload DTS-ES Matrix DTS-ES Discrete Dolby pro logic Stereo surround Mono surround Page Page System Planning Guide Additional notes on speaker placement Your System Settings Page Page Page Page Page Page THX THX Troubleshooting Page Care and Maintenance Canadian Warranty Obtaining Service Specifications 17.26 DimensionsRack Mount Kit Page Madrigal, Inc. All rights reserved

AVP2 specifications

Madrigal Imaging's AVP2 is an advanced multi-channel audio and video processor that has garnered attention for its exceptional performance and innovative features. This state-of-the-art device is designed specifically for high-end home theater systems, providing users with an immersive audio-visual experience.

One of the standout features of the AVP2 is its support for multiple audio formats, including Dolby Atmos and DTS:X. These immersive sound technologies enable users to experience movies and music in three-dimensional audio, allowing them to feel as though they are right in the middle of the action. The AVP2 also supports high-resolution audio formats, making it an ideal choice for audiophiles who demand the best in sound quality.

The AVP2 employs advanced digital signal processing (DSP) technology, which enhances sound clarity and accuracy. With precise calibration and tuning options, users can tailor their audio experience to suit their specific preferences and room acoustics. This DSP technology also enables the AVP2 to deliver superior surround sound, ensuring that every detail of the audio mix is preserved.

For video processing, the AVP2 supports 4K resolution and HDR (High Dynamic Range), allowing users to enjoy stunning picture quality with vibrant colors and enhanced contrast. The processor is equipped with advanced scaling technology that upscales lower-resolution content to near-4K quality, ensuring that all media looks its best.

Connectivity is another key aspect of the AVP2. It features multiple HDMI inputs and outputs, along with various analog and digital audio connections, ensuring compatibility with a wide range of source devices, including Blu-ray players, gaming consoles, and streaming devices. The AVP2 also includes network connectivity options, allowing users to stream content directly from their favorite services.

In addition to its impressive technical specifications, the Madrigal Imaging AVP2 is designed with user-friendliness in mind. Its intuitive interface and remote control provide easy access to all settings and features. Overall, the AVP2 represents a perfect marriage of cutting-edge technology and user-centric design, making it an outstanding choice for anyone looking to elevate their home entertainment setup.
Top Page Image Contents