Kodak Chemicals for Your Film Processor

KODAK FLEXICOLOR Chemicals are supplied as all-liquid concentrates for easy mixing. They are available in sizes that are economical and convenient for minilabs. For more information on processing with these chemicals, visit www.kodak.com/go/photochemicals.

KODAK FLEXICOLOR Developer Replenisher LORR

This developer has low replenishment rates that help reduce developer effluent discharge by as much as 50 percent. Lower replenishment rates mean less chemical mixing and lower cost per roll of film processed. Use only FLEXICOLOR Developer Starter LORR to prepare a fresh tank solution with FLEXICOLOR Developer Replenisher LORR.

Available in sizes to make 5 and 10 litres and 25 U.S. gallons (two 12.5-gallon sizes).

KODAK FLEXICOLOR Developer Starter LORR

Use this starter to prepare a fresh tank solution from FLEXICOLOR Developer Replenisher LORR.

Available in a size to prepare 8.3 U.S. gallons of developer tank solution from developer replenisher.

KODAK FLEXICOLOR Bleach III NR Replenisher

For use in minilabs using Process C-41B or C-41, this bleach offers reduced cost per roll of film and reduced replenishment rates and volume of effluent discharged. It requires no mixing; it is packaged ready to use. Use FLEXICOLOR Bleach Starter to prepare a fresh tank solution.

Available in a 5-litre size.

KODAK FLEXICOLOR RA Bleach Replenisher NR

This bleach is designed for use in minilabs that use Process C-41RA. It requires no mixing; it is packaged ready to use. This bleach is also odorless. Use FLEXICOLOR Bleach Starter to prepare a fresh tank solution.

Available in a 5-litre size.

KODAK FLEXICOLOR Bleach Starter

Use this starter to prepare a bleach tank solution with FLEXICOLOR Bleach III NR Replenisher or FLEXICOLOR RA Bleach Replenisher NR. This product is odorless, non-corrosive, and non-foaming for easy use. Available as a 1-gallon concentrate to make 20 U.S. gallons of Bleach III NR tank solution or 8.3 U.S. gallons of RA Bleach NR tank solution.

KODAK FLEXICOLOR Fixer and Replenisher

Use this fixer for Process C-41 or C-41B.

Available in sizes to make 5 litres and 5 and 25 U.S. gallons.

KODAK FLEXICOLOR RA Fixer and Replenisher

This fixer is designed for use in minilabs that use Process C-41RA.

Available in sizes to make 5 and 10 litres.

KODAK FLEXICOLOR Final Rinse and Replenisher

This final rinse is designed with state-of-the-art surfactants to reduce deposits and drying marks on processed color negative films. It also reduces the potential for biological growth in the mixed solution. This means less maintenance and less frequent dumping of working tanks. Because the new final rinse contains no stabilizing agent, labs will not need to provide formaldehyde training or do the associated record keeping required by OSHA guidelines. You can use the final rinse in minilabs that operate with a wash or a washless cycle.

Note: Do not process films of older design that require a stabilizing agent for image stability. These films are

KODAK VERICOLOR III Film, VERICOLOR Slide Film / SO-279/5072, and VERICOLOR Print Film 4111. Process these films only in a processor that uses FLEXICOLOR Stabilizer III and Replenisher. Films of more recent design, such as KODAK GOLD, MAX, ROYAL GOLD, PROFESSIONAL PORTRA, PROFESSIONAL EKTAPRESS, and PROFESSIONAL SUPRA Films require no stabilization for image stability. They will have optimum image-stability performance when processed with FLEXICOLOR Final Rinse and Replenisher.

Available in sizes to make 5 and 10 litres and 12.5 and 75 U.S. gallons.

KODAK CHEMICALS FOR YOUR PAPER PROCESSOR

These chemicals are supplied as all-liquid concentrates for easy mixing and handling. They are available in sizes that are convenient and economical for minilabs.

KODAK EKTACOLOR PRIME SP Developer Replenisher

This new developer replenisher is designed for minilabs with average to high utilization. Supplied as a single-part concentrate, it offers easy and convenient mixing. Replenishment rates are significantly lower than those of EKTACOLOR PRIME Developer Replenisher.

Available in sizes to prepare 10 litres and 20 gallons (two 10-gallon mixes) of replenisher solution.

Note: EKTACOLOR PRIME SP Developer Replenisher will replace EKTACOLOR PRIME Developer Replenisher, EKTACOLOR PRIME Developer Replenisher LORR, and EKTACOLOR PRIME Developer Regenerator. The discontinuance of these three products will occur at different times in different regions.

KODAK EKTACOLOR PRIME Developer Replenisher

If new EKTACOLOR PRIME SP Developer Replenisher is not yet available in your region, use this developer if your minilab processor has a developer tank turnover every four weeks (or more frequently).

Available in sizes to prepare 10 litres and 25 gallons (two 12.5-gallon mixes) of solution.

Kodak C-41RA Kodak Chemicals for Your Film Processor, Kodak Chemicals for Your Paper Processor