FujiFilm 90, 100 owner manual Turning on Your Camera

Page 16

TURNING ON YOUR CAMERA

Before you can use your camera, you must turn the power on. First press the power supply button which turns on the power. Pressing this button a second time will turn the power off.

When you turn your camera on, the lens cover will open and the initial display will appear in the LCD.

When the power is turned on, the camera is set for automatic mode photography. (p.27)

When you are finished using your camera, turn the power off to conserve your battery. If the power supply is left on for more than 7 minutes without the camera being used, the camera will automatically turn itself off.

Before you turn the camera on, make sure that the lens is not blocked to avoid any interference with the lens extending into its picture taking position.

16

Image 16
Contents Page Contents FeaturesPart Names →p.37 Page Quick Start Guide Compose the picture Press the shutter button down completely Selecting the mode SELF-TIMER →p.46,49 Flash →p.39Focus → p.53 Finder AF Lamp AF lamp status and meaning Preliminary Steps Attaching the StrapLoading the Battery Your camera uses one 3V lithium battery, type CR2/DL CR2Turning on Your Camera Checking Your Battery Setting the Date YEAR-MONTH-DAY/HOUR-MINUTE You can set Press any Buttons to make the Date menu blink Selecting the Date Mode Date modesPress Buttons and select the Date mode Using Your Camera Loading the CameraPage Insert the roll of film Close the camera back Using Your Camera Page Page Press down the shutter release halfway Page Page Using the AUTO-FOCUS Lock Check that the AF lamp green lights up Unloading the Film or Removing Film in MID-ROLL Remove the film When rewinding is complete, the exposure counter will read Page Selecting the Flash Mode Flash modesPress the buttons and select the Flash mode ISO 19.0 ft 13.1 ft 26.6 ft 18.4 ft 11.6 m 38.1 ft 26.2 ft Multi program flash mode Red-eye reduction flash modeWhen using red-eye reduction mode Dealing with red-eyeBack light compensation flash mode Flash-off modeNight portrait slow sync mode Selecting the SELF-TIMER Mode SELF-TIMER modesPress Buttons to make the SELF-TIMER menu blink/light Compose the picture and press the shutter release button Selecting the Remote Controller Mode Press Buttons and select Mode Page M 11 ft 16 ft Selecting the Focus Mode Focus modesPress any Buttons to make the Focus menu blink AF Auto focus mode Landscape modeMacro mode Multi Program Flash Close-up photography in a room or night scenePortrait photography under very bright light Photography against the sunTrouble Shooting During operation Problems Possible Causes SolutionsPrinted pictures Problems Possible Causes Solutions Common Sense Camera Care Specifications ∙ Viewfinder∙ Power Supply Important Safety Notice Page FGS-103106-Ci-01