8
1
2
3
4
How to use the MENU/SET button and
1Selecting the menu and mode
2Selecting the menu
☞Make the menu you want to change blink/light.
3Selecting the mode
☞The current mode blinks.
4Setting the mode
☞ The set mode is displayed. | |
∗ | The LCD backlight is green (mode set) when the power is turned on and when a mode has |
| been set (goes out after 10 seconds). |
| The LCD backlight is orange (mode selection) while the mode is being selected (goes out after |
∗ | 10 seconds of no operation). |
When the LCD is difficult to read at night etc, press any of the , , or buttons to turn the |
backlight (green) on.