Operations, Turn the system on and off

Operations

Turn the system on and off

Use the power switch to turn the SelfCheck system on. For information on shutting the system down and on restarting the software, see the SelfCheck Manager User Guide, which is included on the user documentation CD.

Load printer paper

Use the following procedure to load a new roll of paper in the		Open cover to access printer and paper roll spindle
printer.
1.	Open the printer access cover at the rear of the SelfCheck
	using the key. The 3M™ Dual Lock™ anchors will secure
	the cover open.
2.	Swing the paper retainer toggle to the unlocked position
	and, if present, remove the used paper spool and any paper
	remnants in the printer.
3.	With the paper roll positioned to unroll toward the printer
	as shown, slide the new paper roll over the toggle and onto
	the spool, then swing the toggle into the locked position
	as shown.

4. With printer power on, feed the paper end into the slot near Toggle operation: locking and unlocking the top of the printer. The printer will automatically load,

align, and cut the paper.

Note the slot shape and orientation in the locked and unlocked positions. The toggle must be snug against the paper roll (no gap) in the locked position for proper printer operation.