Regulatory compliance
FCC Radio Frequency Rules and Regulations
This equipment has been tested and found to comply with the limits for a Class A device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can emit radiated radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
NO MODIFICATIONS. Modifications to this device shall not be made without the written consent of 3M Company. Unauthorized modifications may void the authority granted under Federal Communications Commission and Industry Canada rules permitting the operation of this device.
FCC intentional radiator certification
Model 8420 – Model 8422 — FCC ID: DGFTTS810
This equipment contains an intentional radiator approved by the FCC under the FCC ID number shown above. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Industry Canada radio frequency rules and regulations
This Class A digital apparatus complies with Canadian
Cet appareil numerique de la classe A est conforme a la norme
Industry Canada Radio Equipment Certification
Model 8420 – Model 8422 — IC:
EMC compliance Europe
This equipment complies with the requirements of the EMC and R&TTE directives.
Australia
This unit complies with the EMC requirements for Australia.
Japan
© 3M 2011. All rights reserved. | 5 |