Identifying the parts
#» | $¢ |
$¼ | $° |
$Á
$¤
$¦
$¥ $» 
$ª | %¼ |
$£ | %Á |
Additional
#» Lighting aperture
$¼ COUNTER RESET button (p.11, 33, 61) $Á DATE button (p.18, 24)
$ª Lithium battery compartment (p.71) $£ Tripod receptacle (p.13)
$¢ Viewfinder (p.11)
$° TIME button (p.18, 24)
$¤ AUTO LOCK/HOLD switch (p.46)
$¦ WHT BAL(white balance) button (p.58) $¥ GAIN button (p.50)
$» SHUTTER SPEED button (p.50, 52) %¼ IRIS button (p.50)
%Á PROGRAM AE button (p.46)
information
To Watch the demonstration
You can watch a brief demonstration of pictures with special effects.
If the demonstration appears when you turn on the camcorder for the first time, exit the demo mode to use your camcorder.
To enter Demo mode
(1) Remove the cassette and set the POWER switch to VTR.
(2) Turn STANDBY up.
(3) While holding down á, set the POWER switch to CAMERA. Demonstration starts.
If a cassette is inserted, the demo mode will stop. Note that once you enter demo mode, this mode is retained as long as lithium battery is in place. Therefore demonstration starts automatically 10 minutes later every time you set the POWER switch to CAMERA or 10 minutes after the cassette has been removed.
To exit Demo mode
(1) Turn the POWER switch to VTR.
(2) Turn STANDBY up.
(3) While holding down ¹ , turn the POWER switch to CAMERA.
This mark indicates that this product is a genuine accessory for Sony video products.
When purchasing Sony video products, Sony recommends that you purchase | 89 |
accessories with this “GENUINE VIDEO ACCESSORIES” mark. |