JVC TM-15L1D manual SDI terminals, Security slot, SDI 1 terminal BNC, SDI 2 terminal BNC

Page 11

ENGLISH

5SDI terminals

g AUDIO 1 terminal (pin jack)

Input terminal for the analog audio signals.

•Use the SDI 1 terminal for the video connection.

hAUDIO 2 terminal (pin jack)

Input terminal for the analog audio signals.

• Use the SDI 2 terminal for the video connection.

iSDI 1 terminal (BNC)

Input terminal for the SD SDI signals.

•Use the AUDIO 1 terminal for the audio connection.

jSDI 2 terminal (BNC)

Input terminal for the SD SDI signals.

•Use the AUDIO 2 terminal for the audio connection.

kSDI SW. OUT terminal (BNC)

Output terminal for the SD SDI signals.

The SDI signal of the current input (SDI 1 or SDI

2)is re-clocked and output.

NOTE:

•When the input other than SDI 1 or SDI 2 is selected, the SDI signal of the input selected last time is re- clocked and output from this terminal.

g h i j k

5

6

6Security slot

Install a security wire to this slot.

11

Image 11

Contents TM-15L1D FCC Notice U.S.A. only Safety PrecautionsHow to replace the fuse Power ConnectionSafety Precautions English Ventilation openings MaintenanceScreen CabinetContents Front panel Controls and FeaturesInput Select buttons/lamps Power lampAspect button/lamp Blue CHECK/COLOR OFF button/lampRemote external control terminal Make Rear panelAC inlet Video terminalsSDI 2 terminal BNC SDI terminalsSecurity slot SDI 1 terminal BNCTo detach the stand InstallationUsing the monitor on the stand To adjust the stand heightInstalling the monitor on the rack Installing the monitor on the wallMain Menu items How to Use the Main MenuSetting value 00 Setting value AUTO, NTSC, PALHow to Use the SET-UP Menu SET-UP Menu items No Sync Display Delay TimeSetting value GREEN, RED Setting value ON, OFFFunctions to be controlled Opening Short-circuiting How to Use the External ControlHow to use the MAKE/TRIGGER terminal About the external controlPower on TroubleshootingPicture size Following are not malfunctionsVideo SpecificationsFront View Side View Rear View without the stand