JVC TM-15L1D manual SET-UP Menu items

How to Use the SET-UP MENU (cont.)

7SET-UP MENU items

PICTURE SUB ADJ.

Sets the standard level for the picture adjustments by using the CHROMA/PHASE and CONTRAST/BRIGHT buttons on the front panel.

CONTRAST*

BRIGHT*

CHROMA*

PHASE*

reset

Adjusts the standard level for contrast adjustment.	–20 - 00 - +20
Adjusts the standard level for brightness adjustment.	–20 - 00 - +20
Adjusts the standard level for chroma adjustment.	–20 - 00 - +20
Adjusts the standard level for phase adjustment.	–20 - 00 - +20

Restores the items in “PICTURE SUB ADJ.” to the factory settings.

*Memorized for each input.

COLOR TEMP.

Selects the color temperature and adjusts the drive level of each color (R/G/B).

COLOR TEMP.*		Selects the color temperature.	HIGH (9300), LOW (6500),
		• When selecting “USER1” or “USER2,” adjust the R/G/B	USER1, USER2
		drive level below.
	R DRIVE	Adjusts the drive level of red.	–40 - 00 - +40
	G DRIVE
		Adjusts the drive level of green.	–40 - 00 - +40
	B DRIVE
		Adjusts the drive level of blue.	–40 - 00 - +40

*Memorized for each input.

SIZE/POSI. ADJ. (USER)

Adjusts the position and size of the picture. This item is available only when “SCAN SIZE” (☞ page 8) is set to “USER.”

H.SIZE* H. POSI.*

V. SIZE (4:3)* V. SIZE (16:9)* V. POSI. (4:3)* V. POSI. (16:9)*

Adjusts the horizontal picture size.	–40 - 00 - +40
Adjusts the horizontal picture position.	–40 - 00 - +40
Adjusts the vertical picture size (for 4:3 aspect ratio).	–40 - 00 - +40
Adjusts the vertical picture size (for 16:9 aspect ratio).	–40 - 00 - +40
Adjusts the vertical picture position (for 4:3 aspect ratio).	–40 - 00 - +40
Adjusts the vertical picture position (for 16:9 aspect ratio).	–40 - 00 - +40

*Memorized for each input.

REMOTE SETTING

Sets the MAKE/TRIGGER terminal. (☞ page 18)

SYSTEM	Selects the external control system of the MAKE/TRIGGER	MAKE (make contact
	terminal.	system), TRIG. (trigger
		system)
PORT F3
	Selects the input which is controlled by the 3rd pin terminal	VIDEO 1, VIDEO 2, COMPO.,
	of the MAKE/TRIGGER terminal.	SDI 1, SDI 2
PORT F4		• You cannot assign the same
	Selects the input which is controlled by the 4th pin terminal
		input to both “PORT F3” and
	of the MAKE/TRIGGER terminal.
		“PORT F4.”

16