How to Use the Main Menu, Main Menu items

How to Use the MAIN MENU

The MAIN MENU contains the functions for daily use.

Operation guide Shows the buttons for each operation.

7To exit the menu:

1Select

2Adjust

1 Select “all reset”

2Next

Perform “all reset”

Cancel

NOTE:

•The menu automatically disappears in about 30 seconds after the last menu operation.

•Some items may not appear on the menu. Those items are not available for the current input or the current input signal.

BACK LIGHT

Adjusts the brightness of the display.

Sets the level of the component input signal. Setting value: SMPTE (for M2VTR signals), BETACAM (for BetacamVTR 0% set-up signals)

APERTURE

Adjusts the clearness of the picture.

Setting value: 00 - 10

Adjusts the clearness of the outlines of the color signals (R/G/B).

Setting value: OFF, NORMAL, HARD

Adjusts the clearness of the outlines of the luminance signal.

Setting value: OFF, NORMAL, HARD

Selects the color system.

NOTE:

• If the picture is unstable with “AUTO,” select “NTSC” or “PAL.”

Selects the position of the adjustment bars. Setting value: UPPER, LOWER

Restores all the settings and adjustments of the monitor to the factory settings.

•Adjustments made by using the buttons on the front panel will also be reset.

NOTE:

•“HOUR METER X100h” (☞ page 17) will not be reset.

•After performing “all reset,” the screen goes back to the

MAIN MENU.