JVC GR-DVL45 Recording Advanced Features, Snapshot Recording, If you press during Recording

RECORDINGAdvancedFeatures

Snapshot

EN17

SNAPSHOT

ButtonUse your camcorder like a regular camera to take a snapshot, or several of them in succession.

MODE Button

Power Switch

Display

SNAPSHOT MODE SELECTION 1 Set the Power Switch to “ ” or “ ”.

Choose the appropriate Snapshot mode from the 5

2 available by repeatedly pressing MODE until the

desired snapshot mode indicator appears.

SNAPSHOT RECORDING

1 Press SNAPSHOT.

FULL

PHOTO

PIN-UP Pin-Up mode*

Snapshot mode

During snapshot

MULTI-4 Multi-Analyser 4

If you press during Record-Standby . . .
.... “PHOTO” appears and a still image will be
recorded for approx. 6 seconds, then the	RECORDING
camcorder re-enters the Record-Standby mode.
If you press during Recording . . .
.... “PHOTO” appears and a still image will be
recorded for approx. 5 seconds, then normal
recording resumes.
Motor Drive Mode
Keeping SNAPSHOT pressed provides an effect similar to
serial photography. (Interval between still images: approx.
1 second)

NOTES:

●Even if “MULTI-4” or “MULTI-9” is engaged, Snapshot recording will be performed in the FULL mode during Digital Zoom.

●If Snapshot recording is not possible, “PHOTO” blinks when SNAPSHOT is pressed.

●Even if Programme AE with special effects (☞ pg. 24) is engaged, certain modes of Programme AE with special effects are disabled during Snapshot recording. In such a case, the icon blinks.

●During playback as well, all Snapshot modes are available. The shutter sound is not heard.

●During Snapshot recording, the image displayed in the viewfinder may be partially missing. However, there is no defect in the recorded image.

FRAME	MULTI-9
Snapshot mode with
	Multi-Analyser 9
frame*

FULL

Snapshot mode with no frame*

*:There is a momentary camera shutter-type blackout together with the sound effect of a shutter closing, which is recorded together with the image.