JVC GR-DVL25 36 EN, Tape Dubbing, VCR Recording deck, Engage the VCR’s AUX and Record-Pause modes

Following the illustration, connect the camcorder and the VCR. Also refer to pg. 32 and 33.

36EN

TV

VCR (Recording deck)

TAPEDUBBING

Tape Dubbing

1

2 Set the camcorder’s Power Switch to “ ”, turn on the VCR’s power, and insert the appropriate cassettes in the camcorder and the VCR.

3 Engage the VCR’s AUX and Record-Pause modes.

A/V cable (provided) [RCA plug to RCA plug]

White to Audio Output L

To AUDIO, VIDEO* and -IN connectors

S-Video cable (provided)

4 Engage the camcorder’s Play mode to find a spot just before the edit-in point. Once it is reached, press 4/

6on the camcorder.

5 Press 4/6 on the camcorder and engage the VCR’s Record mode.

6 Engage the VCR’s Record-Pause mode and press 4/6on the camcorder.

7 Repeat steps 4 through 6 for additional editing, then stop the VCR and camcorder when finished.

NOTES:

Red to Audio	Yellow to
Output R	Video Output*

To

S-Video

Output

The connectors are located beneath the cover.

●You can use Playback Zoom (☞ pg. 40) or Playback Special Effects (☞ pg. 41) in step 5.

●Before you start dubbing, make sure that the indications do not appear on the connected TV. If they do, they are being recorded onto the new tape.

To choose whether or not the following displays

appear on the connected TV . . .

•Date/Time

..... set “DISPLAY” to “ON” or “OFF” in the Playback

Menu (☞ pg. 30). •Time Code

..... set “TIME CODE” to “ON” or “OFF” in the

Playback Menu (☞ pg. 30). •Playback Sound Mode Display

..... set the Power Switch to “ ”. Press MENU/

BRIGHT and set “ON SCREEN” in the Date/Time Menu (☞ pg. 18 – 20) to “ON” or “OFF”. Then,

set the Power Switch back to “ ”.

*Connect when the S-Video cable is not used.