JVC GR-DVL25, GR-DVL45, GR-DVL20, GR-DVL40 specifications 52 EN

52EN

TROUBLESHOOTING(cont.)

SYMPTOM	POSSIBLE CAUSES		CORRECTIVE ACTION
24. Images on the LCD	24. •In places subject to low		24. •Adjust the brightness and
monitor appear dark or	temperature, images become		angle of the LCD monitor
whitish.	dark due to the characteristics		(☞ pg. 12).
	of the LCD monitor. When
	this happens, the displayed
	colours differ from those that
	are actually recorded. This is
	not a defect of the camcorder.
	•When the LCD monitor’s
	fluorescent light reaches the
	end of its service life,
	images on the LCD monitor
	become dark. Consult your
	nearest JVC dealer.
25. The rear of the LCD	25. •The light used to illuminate		25. •Close the LCD monitor to
monitor is hot.	the LCD monitor causes it to		turn it off or set the Power
	become hot.		Switch to “OFF”, and let the
			unit cool down.
26. The indicators and the	26. •This may occur when the		26.
image colour on the LCD	surface or the edge of the			————
monitor are not clear.	LCD monitor is pressed.
27. The LCD monitor or	27. •Certain Fade/Wipe effects,		27. •Re-read the sections
viewfinder indications	certain modes of Programme		covering Fade/Wipe effects,
blink.	AE with special effects, “DIS”		Programme AE with special
	and other functions that		effects and “DIS”
	cannot be used together are		(☞ pg. 19, 22 – 24).
	selected at the same time.
28. Coloured bright spots	28. •The LCD monitor and the		28.
appear all over the LCD	viewfinder are made with
monitor or the viewfinder.	high-precision technology.
	However, black spots or
	bright spots of light (red,
	green or blue) may appear
	constantly on the LCD			————
	monitor or the viewfinder.
	These spots are not recorded
	on the tape. This is not due to
	any defect of the unit.
	(Effective dots: more than
	99.99%)
29. During recording, sound	29. •This is normal.		29.	————
cannot be heard.
30. Play, Rewind and Fast-	30. •The Power Switch is not set		30. •Set the Power Switch to
Forward functions do not	to “	”.	“	” (☞ pg. 29).
work.
31. The tape is moving, but	31. • Your TV has AV input		31. •Set the TV to the mode or
there is no picture.	terminals, but is not set to its		channel appropriate for
	VIDEO mode.		video playback (☞ pg. 32,
	•The cassette’s cover is open.		33).
			•Close the cassette’s cover
			(☞ pg. 9).