4
1.CS mount: connect the lens with the camera
2.Screw: lock Back focus Adjustment
3.Back focus Adjustment
4.Base: connect the camera with the tripod
5.SD card slot: insert a SD card into this slot for recording and storage
6.Video: not supported (for factory use only)
7.RJ45 Ethernet Connector/ PoE: insert the RJ45 cable for network connection. It also supports PoE (Power over Ethernet).
8.Default Button: reset all of the camera parameters to factory default by pressing for 5 seconds.
9.Reset Button: restart the system.
10.Power Indicator: Red light indicates power connection.
11.I/O Connector: Input/Output Connector
12.Power Terminal
Note
Connectors and field wiring terminals for external Class 2 circuits provided with marking indicating minimum Class of wiring to be used. Class 2 shall be marked adjacent to the field wiring terminals
A/I | Audio in |
GND |
|
A/O | Audio out |
GND |
|
AO | Alarm out |
COM |
|
AI | Alarm in |
GND |
|
6