JVC VN-T16/U manual Installation and Connections, Before You Begin, Unpack Everything

Page 8

3 Installation and Connections

This chapter describes the installation and connection of the Box Camera.

Before You Begin

Please read this INSTRUCTIONS carefully before you install and operate the camera.

Unpack Everything

ŸHD IP Camera

ŸWARRANTY CARD

ŸSAFETY PRECAUTIONS

ŸQUICK GUIDE

Ÿ8-PIN TERMINAL BLOCK for alarm input/output

ŸCD-ROMcontaining INSTRUCTIONS and IP Finder software

Equipment Required

The following tools might help you to complete the installation:

ŸDrill

ŸScrewdrivers

ŸWire cutters

Camera Installation

	Note	All the installation and operations here should conform to your
	Note	local electricity safety rules.
		local electricity safety rules.

Checking Unpacked Camera

When you receive the camera from the shipping agency, please check whether there is any visible damage to its appearance. The protective materials used for the package of the camera can protect most accidental clashes during transportation. Then you can open the box to check the accessories.

7

Image 8

Contents HD IP Camera Instructions Contents Contents of this manual Europe FCC Compliance StatementManufacturer’s Declaration of Conformance Overview of Contents About This DocumentCamera Overview Camera Parts and Definitions Product OverviewCamera Parts and Definitions GND Installation and Connections Camera InstallationBefore You Begin Unpack EverythingConnection type1 Network Camera DiagramMounting Connecting the Camera to a Personal Computer Setting IPConnecting the Camera to a Personal Computer Hardware and Software Requirements∙ On tool menu, click Internet Option Page ∙ Click Tools è Internet Options è Security è Custom level Page Page Image Parameters Overview of Navigation and ControlsLive View Automatic Exposure BasicImage Color Day-Night Settings Brightness adjustmentLevel ContrastShutter Speed AWBGain, B Gain & D Gain Noise ReductionSharpness Backlight CompensationBLCCompression PicturePicture Flip Picture MirrorUser interface of Encoder No.1 is as follows GOP User interface of Encoder No.2 is as follows Rate control Mask Zone Alarm External Digital InputMotion Detection Settings Alarm OutputConfined SD recording priority alarm motion network loss SD RecordingMail Notification ConditionsMail to Email Server SettingsAuthentication Settings Audio Audio InputNetwork Settings Audio OutputBasic NetworkFTP Server PortAuthentication Multicast AddressAdmin Function AdministratorHttps User ListSet Display and Synchronization Mode Date/TimeSet Date and Time Manually Set Date and Time by NTP ServerUpdate DaylightConfiguration Event Log InformationMiscellaneous 51 MiscellaneousSpecifications Operational SpecificationsJVC Kenwood Corporation

Related manuals

Manual 13 pages 36.22 Kb