Connect only one camera to the power line,
Caution
AC24V/DC12V. Do not share the power line with other equipment. The power cable between power source and the camera must be under 3 m.
When powering the camera from AC24V, a UPS source
Caution
should be considered to ensure satisfactory performance.
FCC Compliance Statement
Information to the user: This equipment has been tested and found to comply with the limits for a Class A digital device, Pursuant to Part 15 of the FCC Rules; these limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference. For example, try reorienting or relocating the receiving antenna, increasing the separation between the equipment and receiver, or connecting the equipment to an outlet on a different circuit.
Changes or modifications not expressly approved by the party Caution responsible for compliance could void the user’s authority to
operate the equipment.
This Class A digital apparatus complies with Canadian
Manufacturer’s Declaration of Conformance
Europe
The manufacturer declares that the equipment supplied with this INSTRUCTIONS is compliant with the essential protection requirements of EMC directive 2004/108/EC and General Product Safety Directive GPSD 2001/95/EC, conforming to requirements of standards
3