JVC GR-DVM1DU manual To Take a Snapshot In The Self-Timer Mode, press Snapshot instead

29

Self-Timer

Once the camcorder is set, the camcorder operator can become part of the scene in a more natural way adding the final touch to a memorable picture.

LCD monitor

PUSH-OPEN

Lock button

Power Dial

S			P
5		A	L
	EROFF
C		Y

RECORDING START/STOP button

LCD monitor

F . AUTO – – –

PAUSE

After 15 sec.

F . AUTO

REC

During recording

1 OPEN LCD MONITOR

Press the PUSH-OPENswitch and open the LCD monitor fully.

•You can tilt the LCD monitor upward to 180 degrees so that it faces forward and view yourself while self-recording.

2 SELECT MODE

Press the lock button located on the Power Dial and turn the Power Dial to “” and press RECORDING START/STOP. “” appears in the LCD monitor, and the tally lamp lights and begins blinking 15 seconds before recording starts. When the light stops blinking and stays on, recording begins.

3 END RECORDING

Press RECORDING START/STOP and set the Power Dial to the “REC” or “OFF” position.

•When turning to “OFF”, it is not necessary to press down the lock button.

To Take A Snapshot In The Self-Timer Mode . . .

..... in step 2, press SNAPSHOT instead of

RECORDING START/STOP. After 15 seconds, a 6-second still with the shutter sound effect is recorded. After that, the camcorder enters the Record/Standby mode.