JVC GR-DVM1DU Random Assemble Editing, Start Source Playback, Execute FADE/WIPE, Press FADE/WIPE

60EDITING (Cont.)

Random Assemble Editing

Using the RM-V708U remote control, you can use P.AE/Effects and make an original edited tape.

	To AUDIO input jacks (L/R)
		Red
	AUDIO and	White
		Yellow
	VIDEO cables
		To VIDEO input jack
	To AUDIO output	VCR (Recording deck)
	jacks (L/R)
		To S-VIDEO
	Red
		input jack
	White
		S-VIDEO cable
	Yellow
	To VIDEO output jack	To remote pause jack
	To S-VIDEO output jack	T W
		Editing cable
	Core filter
	To EDIT jack	RM-V708U
Source tape (Camcorder)	New tape (VCR)

1 MAKE CONNECTIONS

Connect the Docking Station to your VCR and make sure that the playback picture and sound are available on the connected TV (☞ pg. 52).

2 START SOURCE PLAYBACK

First turn the Power Dial to "PLAY". Press PLAY and then press R.A. EDIT ON/OFF on the remote control. Make sure to point the remote control at the Docking Station's sensor.

•The Random Assemble Editing Menu appears on the TV screen.

•If you're not using a Fade/Wipe at the Program 1 Edit-In point, go to step 4.

3 EXECUTE FADE/WIPE IN

Press FADE/WIPE.

•Cycle through the effects by pressing repeatedly, and stop when the one you want is displayed.

•You can’t use a Picture Wipe/Dissolve at the beginning of Program 1, or at the end of the last scene.

NOTES:

●When using a JVC VCR with a remote pause terminal, connect the editing jack on the Docking Station to the VCR’s remote pause terminal using an editing cable.

●If you use a JVC VCR not equipped with a remote pause terminal or a non-JVC VCR, connect the Docking Station's editing jack to the remote control's remote pause terminal using an editing cable.

●If the VCR has an S-Video input terminal, connect it using an S-Video cable.

●If the VCR has only one audio input terminal, connect it using a conversion plug (not provided).

●When using the provided cable, make sure you connect the end of the cable with the core filter to the Docking Station.

To Operate The VCR With The Remote Control . . .

..... press and hold SHIFT, then press the

appropriate control button.